morls
16-08-2019, 12:01 PM
Money is too tight to shell out for replacement bolts, so I've tried a fix for the stock ones. I was going to drill out the brass pin, but it pushed out really easily so I could re-use them. I used a punch to flatten the pins a bit, and will put a drop of glue on each to stop them falling out.
Seems good at the moment, will see how it goes when all the gear is on and I do an alignment in the field.
Cheers
Stephen
Seems good at the moment, will see how it goes when all the gear is on and I do an alignment in the field.
Cheers
Stephen