Martin Pugh
17-07-2018, 11:26 PM
Hello
I purchased these castors when I was putting together the design for a custom roll-off-roof observatory, but that went by the wayside.
So they are excess to requirement and now for sale.
Spec:
Rigid caster fitted with durable 6 inch diameter by 2 inch wide v-groove semi steel (cast) wheel.
Wheel rotates on roller bearing (Use for manual speeds; 3 mph.)
1200 pounds capacity per caster
Top plate size: 4" x 4-1/2"
Bolt hole dimensions: 2-5/8" x 3-5/8" to 3" x 3"
Bolt size: 3/8" (hardware not included)
Mounting Height: 7-1/2"
V-groove wheel designed to roll on 45 degree track angled track. Also has a flat face suitable for non-tracked use.
They are in storage but if I recall I have 12 of them.
Shipping will be costly given their weight, but depending on how many you would want will drive the selling cost so PM me if interested.
cheers
Martin
I purchased these castors when I was putting together the design for a custom roll-off-roof observatory, but that went by the wayside.
So they are excess to requirement and now for sale.
Spec:
Rigid caster fitted with durable 6 inch diameter by 2 inch wide v-groove semi steel (cast) wheel.
Wheel rotates on roller bearing (Use for manual speeds; 3 mph.)
1200 pounds capacity per caster
Top plate size: 4" x 4-1/2"
Bolt hole dimensions: 2-5/8" x 3-5/8" to 3" x 3"
Bolt size: 3/8" (hardware not included)
Mounting Height: 7-1/2"
V-groove wheel designed to roll on 45 degree track angled track. Also has a flat face suitable for non-tracked use.
They are in storage but if I recall I have 12 of them.
Shipping will be costly given their weight, but depending on how many you would want will drive the selling cost so PM me if interested.
cheers
Martin