axle01
10-05-2018, 11:11 AM
Just made a counter weight for the AZ-GTi mount, i have a wedge coming to use it in EQ mode.
The bolt is a stainless steel m12 x 300mm, i got a nut and rounded it off on the bench grinder so it would fit into the lock ring, i had to taper it off so it would tighten on the sleeve and not on the brass bush as can be seen in the photo.
The counter weight is 1.3KG.
The bolt maybe to long and the weight to heavy but time will tell.
Al
The bolt is a stainless steel m12 x 300mm, i got a nut and rounded it off on the bench grinder so it would fit into the lock ring, i had to taper it off so it would tighten on the sleeve and not on the brass bush as can be seen in the photo.
The counter weight is 1.3KG.
The bolt maybe to long and the weight to heavy but time will tell.
Al