barx1963
03-03-2018, 06:02 PM
OK so this is a bit of a test image with a new bit of kit! Trying out a Celestron Edge 8" scope. Focal length of 2032mm and f10 means I have an image scale of 0.39" er pixel with my Canon 760D which was a little challenging. Also going back to manual focusing.
Image details
Scope: Celestron Edge HD 8" SCT
Mount: Orion AZ EQ G
Guidescope: Orion 30mm Mini
Guiding: Orion SSAG Pro and PHD2
Acquisition: BYE
13x240s frames with darks and bias (no flats)
Processing DSS and PS CC2017
There is a fair bit of elongation in the stars. I was using a 1.25" nosepiece on my t-ring in the little diagonal that came with the scope. Awaitng a few more bits to arrive so I can get a stiffer imaging train and automate the focusing. Although this is a slow setup at f10 or f7 with the reducer, I am hoping to use it to really get to really "get at" a few galaxies and small features.
Image details
Scope: Celestron Edge HD 8" SCT
Mount: Orion AZ EQ G
Guidescope: Orion 30mm Mini
Guiding: Orion SSAG Pro and PHD2
Acquisition: BYE
13x240s frames with darks and bias (no flats)
Processing DSS and PS CC2017
There is a fair bit of elongation in the stars. I was using a 1.25" nosepiece on my t-ring in the little diagonal that came with the scope. Awaitng a few more bits to arrive so I can get a stiffer imaging train and automate the focusing. Although this is a slow setup at f10 or f7 with the reducer, I am hoping to use it to really get to really "get at" a few galaxies and small features.