ADM saddle

[rodsmith]

I'm after an ADM saddle to suit an NEQ6 with the newer
style puck.

If you have one without a puck I'd be happy with that as I can machine a puck to suit.

Thanks, Rod.

[rodsmith]

No fun on page 2

Rod :D

[Mamba]

Hello Rod,
I have a G11 saddle plate, if you have machining facilities it may be of use, if so contact me.
The saddle is 8 inches long, two 5/16 holes with 1/2 countersinking and centres of 3 inches, only the 3inch dovetail, no vixen, one 4 inch sliding clamp.If of any use please contact me with your e mail address as i am unable to post a photo on here for some reason

Dave Cooke