rally
22-09-2017, 01:07 AM
Sold
======================
P-ME with TheSky+Tpoint+ProTrack, MKS4000 Controller (USB version not RS232) -
Location is Adelaide
I have already put numerous high quality extra data cables through the axis tubes - Ethernet, HDMI, USB, Power
Has the long rectangular Versaplate
This mount has probably been used less than 50 hours in total.
Was only used with my TOA150 and a CDK12.5
Has never resided in an observatory and has always been stored inside the house and inside a Pelican case.
I have a custom machined heavy duty pier that can be supplied with the Mount, its all CNC machined and is built specifically for the P-ME, but this isn't suitable for interstate freighting as it weighs around 120kgs !!
It breaks down into 3 legs and a pier and only needs 3 bolts to secure it - would be capable of supporting over 1000kg !
This is probably worth well over $1000 if you had to buy one but happy to provide for $500 to the buyer.
Can be supplied with a Pelican case if needed for shipping too but since I still need that for my other mount it would be at replacement cost.
I can set this all up out of the back of the vehicle in about 2 hours complete with scope, camera and have it polar aligned, guiding calibrated, roationally calibrated and full Tpoint model within 5 arc secs in RA and Dec (usually better) using Tpoint.
If you are after a nice scope and SBIG camera to go with it I might have one available too !
No trades
PM for further details
Cheers
Rally
.
======================
P-ME with TheSky+Tpoint+ProTrack, MKS4000 Controller (USB version not RS232) -
Location is Adelaide
I have already put numerous high quality extra data cables through the axis tubes - Ethernet, HDMI, USB, Power
Has the long rectangular Versaplate
This mount has probably been used less than 50 hours in total.
Was only used with my TOA150 and a CDK12.5
Has never resided in an observatory and has always been stored inside the house and inside a Pelican case.
I have a custom machined heavy duty pier that can be supplied with the Mount, its all CNC machined and is built specifically for the P-ME, but this isn't suitable for interstate freighting as it weighs around 120kgs !!
It breaks down into 3 legs and a pier and only needs 3 bolts to secure it - would be capable of supporting over 1000kg !
This is probably worth well over $1000 if you had to buy one but happy to provide for $500 to the buyer.
Can be supplied with a Pelican case if needed for shipping too but since I still need that for my other mount it would be at replacement cost.
I can set this all up out of the back of the vehicle in about 2 hours complete with scope, camera and have it polar aligned, guiding calibrated, roationally calibrated and full Tpoint model within 5 arc secs in RA and Dec (usually better) using Tpoint.
If you are after a nice scope and SBIG camera to go with it I might have one available too !
No trades
PM for further details
Cheers
Rally
.