Skywatcher 114/900 reflector

[Missedapproach]

Hi all.
I have a skywatcher reflector OTA I'm wanting to part with. Comes with tube rings, and a telrad mount. (Not the telrad). I have only had this scope out approx 10 times and it is in perfect condition. Great little scope with great quality images.
It is black in colour
I can throw in the original plossl eyepieces it came with 10 and 25mm.

$120 pick up

[mental4astro]

I've asked Ben about making this post first for his OK.

x.X.x

This OTA makes for a wonderful dobbie mount project that can be done in a weekend. I've made several over the years, for friends, family and for schools, :) If you have a little kid in your life, making a dobbie mount for this OTA will give them one gun scope to start with, :)

If throwing a hammer around is not your thing, most timber yards have cutting facilities to be able to cut out the required pieces for a nominal fee. You just need to provide them with the dimensions. Then a few screws, an ice cream tub for bearing tabs, a bit of laminate (if not using melamine board), a lick of paint, and away you go. Might need to borrow a mate's jigsaw to cut out the bearing slots and for hollows that act as handles.

Below is a photo of one such mount I made for a primary school using melamine board. If you use melamine, you will need to seal the cut ends with varnishl to stop water getting in.

Alex.

[Missedapproach]

Make a offer I want this gone as I need the room

[Missedapproach]

Common guys $100 this is a cheap scope

[Missedapproach]

Bump

[Missedapproach]

Bump

[Missedapproach]

Sold