PemPro V2 for an ioptron cem60

[Daveskywill]

Hi: I'm attempting to use pempro v2 using a qhy5 cmos guider and

80mm F7 apo guider scope piggybacked on a Celestron RASA on an

ioptron cem60. PS: I've heard that the cem60 has random pe, and I'm

not sure how that can be or what really that would look like on a pe chart

on pempro?

But, also, ps: once this training routine is done, can I just disconnect a mount

connection between laptop and mount and it will still have the corrections going?

PPS: My guider port on the mount seems to be working, because I Do think

that my guiding is improving things, but not terribly sure, like I haven't

yet since my mount came back from factory checked with guide and without.

But I know that with the Sky X, the mount isn't recognized and PPS: I'm

in a group home setting now, so I've been taken away from my scope,

hopefully I'll have more full roam of things soon!

I Have accomplished over 10 good astro items in the sky using the Celestron

RASA scope.

PPS: I've got the pempro v2 owner's manual, but is there a tutorial, something

better still that I can refer to? Thanks

Please email: DaveWilliamStar@live.com

sorry no pictures

[Daveskywill]

I'm really not exactly sure if my guider is really working:

because the NSEW buttons don't seem to be working on PhD...

And I do know that ASCOM drivers are important, however I'm totally

understanding how to do the programming on them, and have heard that

there is less support for the ioptron cem60. Thanks