Aux plate looking for help to find adaptor

[LeonConstantine]

Hi guys,

I just received my tak fsq 106edx4, and it's beautiful.

However, I ordered the Tak125mm pair rings instead of clamshell, and the Tak Aux off plate to put the rings on. Then I reliased that there is no way I can mount this scope on my paramount MyT, none of my adaptor works with the Aux plate.

http://www.iceinspace.com.au/forum/attachment.php?attachmentid=196001&stc=1&d=1457580083

http://www.iceinspace.com.au/forum/attachment.php?attachmentid=196002&stc=1&d=1457580058

I send mail to Bintel and ADM, but none of them reply to me at all for pretty long time, So here I came, if anyone know where I can order or ask someone to make an adaptor with good quality for the Aux plate and MyT? Cost is not an issue for me.

Thanks

[casstony]

Can you remove the Aux plate and bolt the Losmandy plate directly to the rings?

[casstony]

If you particularly want to keep the Aux plate, you could take the Aux plate and Losmandy dovetail to a metal work/engineering shop, tell them how you want them bolted together and they'll do the job for you.

Alternatively buy a drill press with pilot point drill bits and a Tap & Die set and you can make your own adjustments any time you want.

[brian nordstrom]

:) Looking at the photos it looks like the Tak base will unbolt trom the rings as Tony says , I have one of the Losmandy universal dove tails like yours and I am yet to find a series of holes these wont bolt up to , they are very clever in design .

Good luck its as it's a lovely looking set up .

Brian.