DIY Dew controller

[cydonia]

I"m looking to make a simple Pwm dew controller for my C8 and found these on eBay. I'm wandering if someone knowledgable in this area could tell me if these would work with a standard C8 heater strap. All I would have to add is the RCA socket and power socket?

http://www.ebay.com.au/itm/10-50V-2000W-40A-DC-12V-24V-48V-MAX-Motor-Speed-Control-PWM-HHO-RC-Controller/281684952723?_trksid=p2047675.c1000 05.m1851&_trkparms=aid%3D222007%26algo%3DSIC .MBE%26ao%3D1%26asc%3D2014010615534 4%26meid%3D215b1b14292a4cddae44aa34 32df0775%26pid%3D100005%26rk%3D1%26 rkt%3D6%26sd%3D191276751731

I know these controllers are made by Astrozap etc and have more features and channels but they cost a bit. All I want is a single channel controller.

Thanks in advance for any info

Nick

[miker]

Nick, I use a 10 Amp version of that controller on my Dew Not Dew Strap.
That looks like a good buy. I had to supply my own box and RCA socket.
Just remember to switch it on when you put the scope out to cool down before observing. It is a waste of time switching it on after dew has already formed.

Michael.

[cydonia]

Thanks Michael for the advice,

I will be getting one, way cheaper then buying a ready made controller

Cheers

[billdan]

I've only ever used 50 Ohm Pot's as dew controllers but I don't think I could buy the pot's as cheap as that PWM.

I might buy a couple and try them out.

Bill