Mirror Cell (10")

[peter_4059]

I'm on the lookout for a quality mirror cell to suit a 10" mirror. Let me know (by pm) if you have one you no longer need.

Thanks,

Peter

[alpal]

Have you seen these?

http://www.astrogoods.com/mirrorcells.shtml

[peter_4059]

not that keen on a timber cell And surprised there is no locking bolts for collimation.

[ariefm71]

I'm using one of these for my 10" f6 Zambuto mirror: http://www.orionoptics.co.uk/ACCESSORIES/mirrorcells.html

[peter_4059]

I have looked at those and like the design however I've found it difficult to get any information out of Orion regarding dimensions to know if it will fit my application. My mirror is 254mm diameter and I've been told this would require mods to the cell.

[Blue Skies]

PM sent.

[glend]

Dennis at Dobstuff makes mirror cells from aluminium, they can fit tubes as well as dob mirror boxes:

http://www.dobstuff.com/components.htm