Losmandy dovetail plate

[willik]

Losmandy NEW - With 16.5" hole spacing.
Celestron dovetail plate for 9.25", bolts to existing holes.
Wt. 2.25 lbs. Length 17.25" HS 16.50, Ht. top of tube to top of dovetail bar 1.00" Thickness .6"Losmandy dove tail plate REDUCED PRICE FROM $90 TO $75 last price drop $60.

[UniPol]

watt dose it fit

[Steve_G]

If it fit's a Meade 8" LX200 I'll take it

[willik]

It was used with
CEL 9.25 CELESTRON WEDGE

[willik]

The Dovetail is 43.8mm long and the hole options are 8.8cm between the 2 outer holes and anything from 5c to 5.5cm for the inner holes to mount the dovetail plate.

[Ramsees]

Based on Losmondy website it seems the dovetail should work on Meade products. refer to script below form the website.

http://www.losmandy.com/secondary.html

The Dovetail Plates are the heart of the Losmandy Secondary System. 0.5" x 4.0" x length of the tube assembly. Dovetail Bars may be mounted to the top and bottom of tube assembly for mounting of all D series accessories, making it possible to use both sides of tube for equipment. Mounts to all Astrophysics, Celestron, and Meade systems. The dovetail plates, like all accessories in the Losmandy line, are machined for lightness and rigidity from aluminum stock, then black anodized for a tough, corrosion free surface.

The second measurements seem correct. can you ship this to Melbourne ?

[willik]

[QUOTE=Ramsees;1145738]Based on Losmnndy website it seems the dovetail should work on Meade products. refer to script below form the website this Dovetail plate is only $60 now somebody put it to good use it is like new.

http://www.losmandy.com/secondary.html