losmandy power cable

[thebonz]

I am looking for a power cable to fit the losmandy Gemini system
Regards
john

[mithrandir]

Which model Gemini? The cable has changed over the years.

[thebonz]

The cable I am looking for fits the Gemini 1. It has a 4 pin din plug at the controller end
john

[wasyoungonce]

John

you can make your own..simple:
4 pin DIN element 14 (http://au.element14.com/lumberg/0131-04/plug-free-din-4way/dp/1814820?Ntt=1814820), nice plug OEM, $14.66
4 Pin Din cheaper element 14 (http://au.element14.com/deltron-components/610-0400/plug-din-screened-4pole/dp/1193847?Ntt=1193847), $3.34
4 pin DIN RS components (http://au.rs-online.com/web/p/din-connectors/0491015/?searchTerm=491-015&relevancy-data=636F3D3126696E3D4931384E525353 746F636B4E756D6265724D504E266C753D6 56E266D6D3D6D61746368616C6C26706D3D 5E5C647B337D5B5C732D2F255C2E2C5D5C6 47B332C347D2426706F3D313426736E3D59 2673743D52535F53544F434B5F4E554D424 5522677633D4E4F4E45267573743D343931 2D30313526). cheap good has removable lock cap, $5.76, free postage.

All you then need is wire (thick'ish gauge) and power connector (preferably fused) to power supply. Manual shows which pin is which power wise.

Both power sockets on the Gemini 1 are connected in parallel. As looking at the power sockets on the Gemini, the 2 right pins of each socket are earth, the 2 left side pins are +ve 12~18V DC power in.

[thebonz]

Thanks for that Brendon
Nice plug is on the way
john