PDA

View Full Version here: : Takahashi Color Match?


garymck
26-09-2014, 06:01 PM
Hi,

just got a new TSA 120 and would like to paint a finder scope to match....

Does anyone know an easy to find color match for both Takahashi gree, and white?

Hopefully something at the auto store?

TIA
cheers
Gary

LewisM
26-09-2014, 06:25 PM
Yes, I have colour matches for both the green and the white.

The white is classified as Corvette White - a US colour, but I believe Holts have it in their data base.

The green is VERY similar to Toyota Gypsum - paint code DST17 - but maybe a TOUCH lighter. Genuine Tak green paint is available from AEC, the official and ONLY Tak dealer in Australia. I believe it is $9 a pot or similar.

NOTE: the Tak finders have white, black and silver trim only - no green. Green is reserved for the castings only (focuser, objective cell, dewshield caps, finder brackets, clamshells, offset plates etc).

I painted the Vixen rings in the photo of my FC-100 with Holts DST17 Gypsum - close, but not QUITE. I have since obtained a genuine pot, and had my auto paint shop mix me up a larger tin. I airbrush it with very good results.

Kunama
27-09-2014, 07:22 AM
Krylon Honeydew/Ambrosia is a pretty good match for the Tak green. It is a bit too glossy so a coat of satin clear on top can be used.

garymck
27-09-2014, 10:17 AM
Hi Lewis,
thanks for the info. I intend to paint a few non Tak bits and pieces to match the new scope....which btw had a very brief first light last night. Have never seen a perfect star test before :-)
cheers
Gary

LewisM
27-09-2014, 11:12 AM
Get used to it :)

The FC-100 I have throws perfect in and out star test patterns each and every time - never get bored looking at it ;) We BOTH thought Vixen was really good eh... then you look through a Tak. YEOWZERS!

The TSA-120 is a lovely scope.