Bassnut
12-04-2014, 07:58 PM
Hi Guys
For those interested in 3D printing, here are the design file pics (from Bonzia 3D) for my (and Phil Hart) TL machine Mk2 Base module, with and without the cam (5d mk2) fitted. The yellow gear connects to a gear fitted to the lens (not shown) for automatic lens twist (to eliminate flicker, long story). The 2 fitted servo motors shown operate the camera dial and iso button. The box doesnt show the PCB to be fitted and the tubey stuff is a combination of just for looks and to contain wiring and power/dew heater sockets. Lens twist gear options include a range of lenses. The human interface for all this, is a wireless remote not shown.
The round can houses 4 LDRs for ambient light measurement.
Cheers
Fred
For those interested in 3D printing, here are the design file pics (from Bonzia 3D) for my (and Phil Hart) TL machine Mk2 Base module, with and without the cam (5d mk2) fitted. The yellow gear connects to a gear fitted to the lens (not shown) for automatic lens twist (to eliminate flicker, long story). The 2 fitted servo motors shown operate the camera dial and iso button. The box doesnt show the PCB to be fitted and the tubey stuff is a combination of just for looks and to contain wiring and power/dew heater sockets. Lens twist gear options include a range of lenses. The human interface for all this, is a wireless remote not shown.
The round can houses 4 LDRs for ambient light measurement.
Cheers
Fred