EtaCarina @ 200mm (Ha-only)

[IanP]

EtaCarina, 15x4min Ha
Lens: Canon 200mm
Camera: STT-8300m + filter wheel
Mount: CGEM (unguided)

I had a problem with calibration of the light frames, as PixInsight displayed the following error:
"Zero or insignificant scaling factor for flat frame channel#0. (empty master flat frame image?)”
The working solution that I found after several tries was to slightly stretch the MasterFlatFrame and then the calibration went through smoothly ..

Has anyone noticed this issue in PixInsight?:question:

[AG Hybrid]

Looks great. The Gem cluster to the top left looks good too.

[IanP]

Cheers Adrian
:thanx:

[gregbradley]

That's a very good lens image. Nice and widefield and shows up a lot of structure.

Flats divide the value of the pixels into the main image. So you can't divide by zero and I assume that's what that error message means.

How did you make your flat? Is it about 12 frames median combined and about 20- 30,000 ADU each?

Greg.

[IanP]

Thanks Greg,
:thanx:
I took 30 flats, as I usually do, calibrated them with bias & darks, as I usually do, and integrated them in the same way as I have been doing since I started using PixInsight. The only difference was that this time I adjusted the LEDs voltage in my light-box little bit lower, so the illumination inside the box was lower than usual.
The way I solved the problem was (trial and error) by slightly stretching the MasterFlatFrame and after that the calibration of all other colours and NB went smoothly through ..
:hi: