astronobob
09-12-2013, 04:32 AM
After having both PC and Laptop down for over a week, Lappy back the other day, so I tried my hand at Juup with 1st light on the Qhy5 II OSC chip.
Interesting as there seems to be a problem capturing the color, There were No Settings for RGB in the Ezy Planet capture prog, only had B/W-Mono; RG; RB; GB; but no RGB ? So, has left a strange hue about, will need to investigate ? Any advice on this will be appreciated.
Anyway, Tansparancy was good to fair, seeing was rather poor. Scope was the 10" F4.7 Newt with 3x Meade barlow = FL 3600mm
Capturing at 15fps, AVI, Stacked the best 100 from 195 in Registax, Processed in Registax wavelengths only, as am without PS atm. Some onion rings and griding evident tho am happy with my humble result, kind of :rolleyes:
1st pic, unprocessed Registax stacked output file.
2nd Pic, processed :shrug:
Hope it worth the Squizz , ,
Interesting as there seems to be a problem capturing the color, There were No Settings for RGB in the Ezy Planet capture prog, only had B/W-Mono; RG; RB; GB; but no RGB ? So, has left a strange hue about, will need to investigate ? Any advice on this will be appreciated.
Anyway, Tansparancy was good to fair, seeing was rather poor. Scope was the 10" F4.7 Newt with 3x Meade barlow = FL 3600mm
Capturing at 15fps, AVI, Stacked the best 100 from 195 in Registax, Processed in Registax wavelengths only, as am without PS atm. Some onion rings and griding evident tho am happy with my humble result, kind of :rolleyes:
1st pic, unprocessed Registax stacked output file.
2nd Pic, processed :shrug:
Hope it worth the Squizz , ,