chances
18-11-2013, 09:06 PM
Selling my complete astrophotography setup, well its almost complete except for a DSLR or CCD camera, included is the ASI120MC camera which is great for planetary but I mainly use it as an autoguider.
So the telescope tube is a little scratched and dinted on the outside but the mirrors are in good condition. Visually and photographically they seem to perform fantastic.
The stand has a slight dent in one of the legs, other than that it has very recently had the internals upgraded with new stepper motors, motherboard and hand controller. The original internals/controller are also included.
I do need to add an extra 1.5kg weight when using my DSLR camera to balance everything - this will also be included but is not pictured.
Everything else is less than 3 months old, reason for selling is I want to get something a little smaller.
I've attached photos of the equipment and also some photos taken with this setup over the last couple of months using a standard Canon 450D DSLR camera.
Looking for $1950 for the lot.
No way I can post this stuff anywhere so pickup only.
Selling complete, wont separate any bits...
Includes
Skywatcher 254x1200mm Newtonian Telescope and EQ6 Synscan mount
EQ6 Telescope mount, brand new stepper motors, motherboard and handcontroller recently upgraded
Original EQ6 motors, motherboard and hand controller
3 x 5kg counterweights + 1.5kg weight
EQ6mod cable
4port USB3 powered hub
Wireless controller for EQMOD
Skywatcher 80mm Guidescope
105mm rings and dovetail for guidescope
ASI120MC CCD camera for Planetary and Autoguiding
Orion 1.25" extenter tube
GSO Laser collimator
2" 2x ED GSO Barlow
1.25" 2x Barlow
Canon T-ring
2" adaptor for T-Ring
2" 28mm eyepiece
1.25" 9mm eyepiece
So the telescope tube is a little scratched and dinted on the outside but the mirrors are in good condition. Visually and photographically they seem to perform fantastic.
The stand has a slight dent in one of the legs, other than that it has very recently had the internals upgraded with new stepper motors, motherboard and hand controller. The original internals/controller are also included.
I do need to add an extra 1.5kg weight when using my DSLR camera to balance everything - this will also be included but is not pictured.
Everything else is less than 3 months old, reason for selling is I want to get something a little smaller.
I've attached photos of the equipment and also some photos taken with this setup over the last couple of months using a standard Canon 450D DSLR camera.
Looking for $1950 for the lot.
No way I can post this stuff anywhere so pickup only.
Selling complete, wont separate any bits...
Includes
Skywatcher 254x1200mm Newtonian Telescope and EQ6 Synscan mount
EQ6 Telescope mount, brand new stepper motors, motherboard and handcontroller recently upgraded
Original EQ6 motors, motherboard and hand controller
3 x 5kg counterweights + 1.5kg weight
EQ6mod cable
4port USB3 powered hub
Wireless controller for EQMOD
Skywatcher 80mm Guidescope
105mm rings and dovetail for guidescope
ASI120MC CCD camera for Planetary and Autoguiding
Orion 1.25" extenter tube
GSO Laser collimator
2" 2x ED GSO Barlow
1.25" 2x Barlow
Canon T-ring
2" adaptor for T-Ring
2" 28mm eyepiece
1.25" 9mm eyepiece