Go Back   IceInSpace > Equipment > ATM and DIY Projects

Reply
 
Thread Tools Rating: Thread Rating: 5 votes, 5.00 average.
  #21  
Old 21-04-2007, 07:56 PM
Orion's Avatar
Orion
Obsessed

Orion is offline
 
Join Date: Jan 2005
Location: Swansea N.S.W.
Posts: 1,107
Quote:
Originally Posted by AstroJunk View Post

BTW, If the eyepiece height is low enough to avoid a ladder you may be able to angle the focuser like smaller dobs to make it more comfortable at lower declinations.
Do you mean position the focuser further around the telescope? I will look into it thanks
Reply With Quote
  #22  
Old 21-04-2007, 08:08 PM
Orion's Avatar
Orion
Obsessed

Orion is offline
 
Join Date: Jan 2005
Location: Swansea N.S.W.
Posts: 1,107
Quote:
Originally Posted by rmcpb View Post
Looked thorugh George's scope at the SPSS which is the same design and also throught the 25" Obsession. Liked the idea of not climbing ladders in the night
Climbing up the ladder is what put me of the 25" at Lostock.
There were three of us looking through Georges scope the Wednesday night at Lostock before everyone arrived and the views through his 18" Nasmyth weren't half bad!
Being a mate he agreed to do the optics on the 24"
Reply With Quote
  #23  
Old 26-04-2007, 08:00 PM
Kal's Avatar
Kal (Andrew)
1¼" ñì®våñá

Kal is offline
 
Join Date: Nov 2006
Location: Sydney
Posts: 1,845
Great looking project and I look forward to seeing the next batch of pics
Reply With Quote
  #24  
Old 28-04-2007, 07:32 AM
Orion's Avatar
Orion
Obsessed

Orion is offline
 
Join Date: Jan 2005
Location: Swansea N.S.W.
Posts: 1,107
Progress report. Finished the second ring and focuser board.
Attached Thumbnails
Click for full-size image (1.jpg)
84.3 KB199 views
Click for full-size image (2.jpg)
108.3 KB269 views
Click for full-size image (4.jpg)
100.9 KB206 views
Click for full-size image (5.jpg)
144.9 KB251 views
Click for full-size image (6.jpg)
140.3 KB362 views
Reply With Quote
  #25  
Old 28-04-2007, 10:06 AM
KMachell
Registered User

KMachell is offline
 
Join Date: Feb 2007
Location: Cranbourne, Vic., Australia
Posts: 12
Ed,

This truly is a work of art in progress.

If the optics are of the same standard it will be an amazing instrument.

Hope there will be enough photons left for us who are not so well 'aperatured' .

Great work
Reply With Quote
  #26  
Old 29-04-2007, 09:44 AM
rockit's Avatar
rockit
Registered User

rockit is offline
 
Join Date: Feb 2007
Location: brisbane
Posts: 25
Nice work, I have been intending doing the same project for too long. One question, collimating? The tertiary mirror will certainly test these skills. IMO this design isn't exploited enough, for people restricted to a wheel chair it gives them easy access to the ep. I am waiting on the 16" mirrors to hit main stream, but the PMC silvered-silicon can't happen quick enough. I hope they utilize the technology and not keep it for the rich. Even at 14" trying to separate your memory recognition from visual resolution switches in and out. I know you are going to enjoy all the clear and easy views when this princess is completed.
Reply With Quote
  #27  
Old 29-04-2007, 01:58 PM
okiscopey's Avatar
okiscopey (Mike)
Rocky Peak Observatory

okiscopey is offline
 
Join Date: Aug 2006
Location: Kandos NSW
Posts: 536
Quote:
Originally Posted by rockit View Post
I am waiting on the 16" mirrors to hit main stream, but the PMC silvered-silicon can't happen quick enough. I hope they utilize the technology and not keep it for the rich.
Eh, wot? PMC was a joke in the APRIL edition of the Bintel magazine!
Reply With Quote
  #28  
Old 29-04-2007, 05:24 PM
Orion's Avatar
Orion
Obsessed

Orion is offline
 
Join Date: Jan 2005
Location: Swansea N.S.W.
Posts: 1,107
I think this was the article courtesy from Night Sky Bintel.............

Precious Metal Clay, PMC, was developed and patented in the 1990’s by
Mitsubishi Materials of Japan and has been used since then to create handmade
items of jewelery. Microscopic particles of silver are mixed with a
moist binder to create a material that has the feel and working properties of
modeling clay. Using simple tools, objects are easily given shape, texture,
and character. After air-drying, the objects are heated to temperatures
approaching the melting point of the metal, where the particles fuse together
to make a dense, fully metallic object. Fired PMC work can be polished,
soldered, enameled, and worn as jewelery like any other silver item.
By substituting powdered Zerodur for eighty percent of the silver, test mirrors
have been made using the same process. Astronomical mirrors produced in
this manner are self-reflective coated and require only a very thin dielectric
coating to be made 98% reflective.
By utilising a pressure mould and injecting the PMC/Zerodur/silver slurry
into the mould under high temperature and pressure, a very accurate, thinwalled,
honeycomb mirror is produced. The surface accuracy, when removed
from the mould, is of a very high order and requires minimal ‘finishing’ to
produce a useable mirror.
The problem of ‘print-through’, which has always been the bugbear of
honeycomb mirrors, is avoided because of the added thermal stability due to
the Zerodur content and the open back of the honeycomb. Cost compares
extremely well with conventional mirror production. PMC mirrors are one
third the weight of a similar-sized glass mirror and are subject to less than a
tenth of the flexure. Thermal stability is almost as good as Zerodur.
PMC Glass Corporation has made a number of 1.45metre mirrors available
for evaluation by amateur astronomical societies under different climatic
conditions. Two of the mirrors are allocated to Australia. The first has arrived
and will be installed in a large Dobsonian-style mount. The second is yet to
be allocated to an astronomical society, but will be fitted into an equatorial
mount for comparison purposes.
Reply With Quote
  #29  
Old 29-04-2007, 06:56 PM
stringscope (Ian)
Registered User

stringscope is offline
 
Join Date: Mar 2005
Location: Canberra
Posts: 419
Looking good Ed Keep the photo's coming.

Cheers,
Reply With Quote
  #30  
Old 29-04-2007, 07:01 PM
Orion's Avatar
Orion
Obsessed

Orion is offline
 
Join Date: Jan 2005
Location: Swansea N.S.W.
Posts: 1,107
Thanks Ian.
Working on the tertiary at the moment.
Reply With Quote
  #31  
Old 03-05-2007, 05:49 PM
Orion's Avatar
Orion
Obsessed

Orion is offline
 
Join Date: Jan 2005
Location: Swansea N.S.W.
Posts: 1,107
Here are some pics showing my progress. I started working on the tertiary light baffle and curved spider veins. While I was doing that I decided to cut some ellipses with the minor axis being 78mm.
The cutting tool I made was out of an old pipe that was machined to the right thickness and diameter. To cut six layers of glass it took around 3 hours which gave me some time to make the spider veins.

All in all everything turned out well and tomorrow I'll finished the tertiary holder.
Attached Thumbnails
Click for full-size image (1.jpg)
112.1 KB211 views
Click for full-size image (2.jpg)
98.0 KB228 views
Click for full-size image (3.jpg)
66.6 KB228 views
Click for full-size image (4.jpg)
76.1 KB264 views
Click for full-size image (5.jpg)
102.4 KB264 views
Reply With Quote
  #32  
Old 03-05-2007, 05:53 PM
Orion's Avatar
Orion
Obsessed

Orion is offline
 
Join Date: Jan 2005
Location: Swansea N.S.W.
Posts: 1,107
A few more...
Attached Thumbnails
Click for full-size image (6.jpg)
117.2 KB204 views
Click for full-size image (7.jpg)
72.6 KB255 views
Click for full-size image (8.jpg)
115.9 KB186 views
Click for full-size image (9.jpg)
132.5 KB223 views
Click for full-size image (10.jpg)
134.5 KB217 views
Reply With Quote
  #33  
Old 03-05-2007, 10:12 PM
h0ughy's Avatar
h0ughy (David)
Moderator

h0ughy is offline
 
Join Date: Apr 2005
Location: NEWCASTLE NSW Australia
Posts: 33,156
fantastic Eddie, your really bringing this to life
Reply With Quote
  #34  
Old 03-05-2007, 10:34 PM
Kal's Avatar
Kal (Andrew)
1¼" ñì®våñá

Kal is offline
 
Join Date: Nov 2006
Location: Sydney
Posts: 1,845
Nice work, and an interesting read of PMC. Who knows, in 10-20 years glass may be obsolete in reflectors
Reply With Quote
  #35  
Old 24-05-2007, 07:51 PM
Orion's Avatar
Orion
Obsessed

Orion is offline
 
Join Date: Jan 2005
Location: Swansea N.S.W.
Posts: 1,107
Update...

Well I finally got to put the pieces together.

I was pleasantly surprised when I had the top half of the telescope assembled I got accustomed to seeing it as a drawing on the computer and when it's right in front of you you get a real perspective on size.

Next on the list is to put the tertiary in.
Attached Thumbnails
Click for full-size image (1.jpg)
111.4 KB673 views
Click for full-size image (2.jpg)
114.2 KB450 views
Click for full-size image (3.jpg)
113.1 KB380 views
Reply With Quote
  #36  
Old 24-05-2007, 09:19 PM
h0ughy's Avatar
h0ughy (David)
Moderator

h0ughy is offline
 
Join Date: Apr 2005
Location: NEWCASTLE NSW Australia
Posts: 33,156
Quote:
Originally Posted by Orion View Post
Well I finally got to put the pieces together.

I was pleasantly surprised when I had the top half of the telescope assembled I got accustomed to seeing it as a drawing on the computer and when it's right in front of you you get a real perspective on size.

Next on the list is to put the tertiary in.

Awesome, you know that coffee table looks great.
Reply With Quote
  #37  
Old 25-05-2007, 10:34 AM
Satchmo's Avatar
Satchmo
Registered User

Satchmo is offline
 
Join Date: Dec 2005
Location: Sydney
Posts: 1,865
Looking great Ed Those Moonlirte truss blocks sure save a lot of work and calculation.

I was interested in your stratedgy of fitting a curved spider for the tertiary mirror rather than the more traditional approach of using another 4 vane spider and adjusting their position optically to line up with the secondary 4 vane spider .
Reply With Quote
  #38  
Old 26-05-2007, 07:11 AM
Orion's Avatar
Orion
Obsessed

Orion is offline
 
Join Date: Jan 2005
Location: Swansea N.S.W.
Posts: 1,107
Quote:
Originally Posted by Satchmo View Post
Looking great Ed Those Moonlirte truss blocks sure save a lot of work and calculation.

I was interested in your stratedgy of fitting a curved spider for the tertiary mirror rather than the more traditional approach of using another 4 vane spider and adjusting their position optically to line up with the secondary 4 vane spider .
Well I am still experimenting with the veins.

I want to stay away from having the four veins aligned with the secondary because it is hard to do it precise and if it is off by a fraction the defraction spikes on a star image will be quiet long.

There are still other options to try. The thing in desinging and biulding your own scope is that if something dosen't work.... well, you find something that does.
Reply With Quote
  #39  
Old 26-05-2007, 07:12 AM
Orion's Avatar
Orion
Obsessed

Orion is offline
 
Join Date: Jan 2005
Location: Swansea N.S.W.
Posts: 1,107
Quote:
Originally Posted by h0ughy View Post
Awesome, you know that coffee table looks great.
Thats plan ...B
Reply With Quote
  #40  
Old 26-05-2007, 07:24 AM
Astroman's Avatar
Astroman (Andrew Wall)
<><><><>

Astroman is offline
 
Join Date: Feb 2005
Location: Paralowie, South Australia
Posts: 4,367
Looking very nice now, really puts it in perspective on how big this thing is.
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 11:58 AM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Advertisement
Bintel
Advertisement
Testar
Advertisement