Go Back   IceInSpace > IceTrade Classifieds > IceTrade Archives

 
 
Thread Tools Rate Thread
  #1  
Old 13-11-2019, 10:33 AM
miki63au's Avatar
miki63au
Registered User

miki63au is offline
 
Join Date: Jul 2007
Location: Adelaide
Posts: 388
1100D for parts

Hi everyone,


Working on my 1100D's cooling and I managed to bust a small socket on the main PCB



I'm looking for a 1100D for spare parts... on the budget, so cheap as possible. No lens needed. I'll use only the main PCB.


PM if you have one, and how much would you sell it for.



Thanks,

Mick

Last edited by miki63au; 27-11-2019 at 07:33 PM.
  #2  
Old 13-11-2019, 10:58 AM
JA
.....

JA is offline
 
Join Date: Oct 2016
Location: Melbourne, Australia
Posts: 2,945
Is repair of the socket possible? Perhaps bypass the socket with direct wired connection, that is of course if it's not a ribbon type connector, that would be very difficult. Perhaps you could post a pic and get some suggestions.

Good luck

Best
JA
  #3  
Old 13-11-2019, 11:18 AM
miki63au's Avatar
miki63au
Registered User

miki63au is offline
 
Join Date: Jul 2007
Location: Adelaide
Posts: 388
Quote:
Originally Posted by JA View Post
Is repair of the socket possible? Perhaps bypass the socket with direct wired connection, that is of course if it's not a ribbon type connector, that would be very difficult. Perhaps you could post a pic and get some suggestions.

Good luck

Best
JA

Tnx JA,


I design electronics, PCB with SMD components, building proto etc.
No, this one is not replaceable... I did tried to re-align the pins and jam the clip back under the microscope. Nope... not going to happen. And the flat flex pcb ribbon is not solderable.


Mick
  #4  
Old 13-11-2019, 11:32 AM
JA
.....

JA is offline
 
Join Date: Oct 2016
Location: Melbourne, Australia
Posts: 2,945
Sorry to hear the bad news. There are a couple of 1100D mainboards and ribbon cables on eBay here...

https://www.ebay.com.au/sch/i.html?_...c&LH_PrefLoc=2

Best
JA
  #5  
Old 13-11-2019, 01:26 PM
miki63au's Avatar
miki63au
Registered User

miki63au is offline
 
Join Date: Jul 2007
Location: Adelaide
Posts: 388
Quote:
Originally Posted by JA View Post
Sorry to hear the bad news. There are a couple of 1100D mainboards and ribbon cables on eBay here...

https://www.ebay.com.au/sch/i.html?_...c&LH_PrefLoc=2

Best
JA

Cheers JA,


My way of thinking is if I get lucky and find a cheep pcb replacement then I'll risk to buy it... there is no guaranty it will work, other fault(s) possible elsewhere.

But if I have to spend hundreds $$$ (I don't have right now...job security issues)then I better of buying a 2nd hand OSC ...like the QHY8(s) I missed out on lately.


Mick

Last edited by miki63au; 13-11-2019 at 01:37 PM.
  #6  
Old 13-11-2019, 03:45 PM
RyanJones
Registered User

RyanJones is offline
 
Join Date: Jun 2018
Location: Melbourne,Australia
Posts: 1,439
I can’t help you source the board Mick. I just thought I’d offer my sympathy as I’ve also just killed a perfectly good 350d during a cooling project. Best of luck finding what you need and best of luck with the cooling project.

Cheers

Ryan
  #7  
Old 13-11-2019, 05:11 PM
miki63au's Avatar
miki63au
Registered User

miki63au is offline
 
Join Date: Jul 2007
Location: Adelaide
Posts: 388
Quote:
Originally Posted by RyanJones View Post
I can’t help you source the board Mick. I just thought I’d offer my sympathy as I’ve also just killed a perfectly good 350d during a cooling project. Best of luck finding what you need and best of luck with the cooling project.

Cheers

Ryan
Oh, thanks Ryan ... we should feel sorry for ourselves.
In my case actually amazing how much abuse the camera took over the years. Survived the filter surgery, slide in a copper foil and jammed it with mika (spell?) And pushed a peltier cooler recycled from an old Meade CCD. It worked,
But the copper foil is too thin got loose. So I replaced it with a 0.35mm sheet. Oops... brocke one connector. Bugger

Good luck with yours
Mick
  #8  
Old 14-11-2019, 12:40 PM
iborg's Avatar
iborg (Philip)
Registered User

iborg is offline
 
Join Date: Feb 2015
Location: Lynbrook, Australia
Posts: 611
Hi Mick



I have a dead 1100D. I don't know what killed it as I received it that way.


If you pay pay postage, I'll send it. If the board works, I'll ask $50, which is what (I think) I foolishly paid for the whole thing.



Grand ideas of doing something for cooling, but, wanted a dead body to open up first.


Let me know if you are interested.


Philip
  #9  
Old 14-11-2019, 12:45 PM
miki63au's Avatar
miki63au
Registered User

miki63au is offline
 
Join Date: Jul 2007
Location: Adelaide
Posts: 388
Quote:
Originally Posted by iborg View Post
Hi Mick



I have a dead 1100D. I don't know what killed it as I received it that way.


If you pay pay postage, I'll send it. If the board works, I'll ask $50, which is what (I think) I foolishly paid for the whole thing.



Grand ideas of doing something for cooling, but, wanted a dead body to open up first.


Let me know if you are interested.


Philip

Great, tnx Philip. I'll send pm
 

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 05:05 AM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Advertisement
Bintel
Advertisement
Testar
Advertisement