2 scopes - which one should I use to establish PEC?

[Stonius (Markus)]

Does it make a difference?


The image scale will be larger with the RC10 so maybe it would be more accurate compared to the Esprit 120? Also the RC10 is a much heavier scope, so maybe that would help make sure the bits are meshing nicely?


Cheers


Markus

[glend (Glen)]

Does it really matter, slop is slop? Either can be balanced East heavy or whatever way to choose to set it up.

[Stonius (Markus)]

I just figure the longer F/ratio scope would possibly me more accurate since any periodic error would be magnified more by the optics. But it's a different and much heavier scope, so I was thinking maybe that would affect things?


M

[billdan (Bill)]

Markus, I hope its not an EQ6 you are trying to do PEC on, with mine the worm cycle was totally different for each cycle. So I could never get the PEC trained properly, when I tried it.

As shown by this 25 minute capture of PHD2 guide assistant, each worm cycle is different.

[multiweb (Marc)]

The one with the longest FL.

[Stonius (Markus)]

Originally Posted by billdan

Markus, I hope its not an EQ6 you are trying to do PEC on, with mine the worm cycle was totally different for each cycle. So I could never get the PEC trained properly, when I tried it.

As shown by this 25 minute capture of PHD2 guide assistant, each worm cycle is different.

It's a Losmandy G2. The timing is a little funky but I think you can compensate in the software before outputting the smoothed curve.


Maybe...we'll see.


Markus