Hi to all just wondering if there is a good quality SkyGlow / Light pollution filter out there for a ASI1600MC colour imager .
any suggestion would be greatly appreciated
cheers Pete
thanks Guys
I have a 10" f4 Truss Newt imaging scope there is not much information out there for filters for colour imagers narrow band ,light Pollution ect most of my imaging is done over the north east where I get a bit of Sydney sky glow
cheers Pete
@f/4 you should still be OK with the 1.25"...I've used my 1600 with a Canon f/4 lens wide open and didn't see any obvious vignetting. Just make sure your filter wheel is right in front of the camera and any spacers are scope side.