Time to thin the herd, I have three moonlight focusers of various types with three options for mounting.
These are the CS 2 inch format focuser for SCT/ RC/ Solar Scopes/ Tak Mewlon telescopes.
I have adapters for Meade, Celestron and GSO
So here is how it's going to work, the first buyer gets to choose what adapter they want, the second buyer has one less choice etc.
ADAPTER OPTIONS
Choice 1. Meade 3-inch mount screws directly onto the large 3-inch diameter rear cell thread of the Meade 10/12/14" Schmidt Cassegrain Telescopes.
Choice 2. Meade or Celestron SCT thread, fits Meade 8/10/12/14" and Celestron 8/9.25/11/14" this adapter also allows a Meade / Celestron 6.3 reducer to be inserted into the body of the focuser
Choice 3. GSO RC 6 " and 8" that's the M90 x1 thread.
SOLD Blue Moonlight focuser fitted with the High Res Stepper Motor, Drawtube travel is 0.95" or 24.13mm, the controller is a Focus Dream Pro with temperature sensor all cables and software are included except for the 12 volt cable (this is just a standard plug). This focuser is in mint condition. This one only $530 Express Posted to anywhere in Australia
SOLD Red Moonlight focuser fitted with the High Res Stepper Motor with Temperature Sensor and Power Slip clutch, Drawtube travel is 1.5" or 38.1mm, the controller is a Moonlight Mini and all cables are included except for the 12 volt cable (this is just a standard plug). This focuser is in mint condition. This one only $630 Express Posted to anywhere in Australia
SOLD Orange Moonlight focuser fitted with the Moonlight D.C. Motor with Power Slip clutch, Drawtube travel is 1.5" or 38.1mm, the controller is a Moonlight Dual D.C. Motor Controller (That is a Hand Controller, this one is not computer controlled) powered by two AA Batteries. This one only $630 Express Posted to anywhere in Australia
Any CS2 moonlight focuser with a motor and controller from the USA will cost over $1000 Australian dollars.