Continuing to clear out the now-no-longer-required items
As before, shown price INCLUDES postage WITHIN AUSTRALIA.
Numbers correspond to the photos in case the order gets mixed up
1. Optec NEQ-6 tripod head to Vixen GPD/GPDX/GPD2 or Skywatcher HEQ5 equatorial head. Cost new is over $110 Aus. Selling this for $65 SOLD SOLD SOLD
2. Vixen counterweight shaft top nut for GP/GPD/GPDX/GPD2 $15
3. Vixen GPD dovetail head with clamps $20 SOLD SOLD SOLD
4. Vixen DAMAGED SXW head - what you see is what you get. I bought the SXW with this damaged head and replaced with a new head. Good for parts - it still functions but the locking screw snapped (2 pieces) and a small area broke out from the casting. (Photos 4). AS IS $15 SOLD SOLD SOLD
5. Vixen GP/GPD/GPDX/GPD2 (and MAYBE EQ5?) altitude jack screw and azimuth screw set (8mm thread). A little bent on one, some rust (this is why I replaced them with new ones I imported). Az screws plastic is a bit rough and tumble. $15 {on hold}
6. SOLD
7. Vixen 6x30 finder stalk - as-new hammertone green. Hard to find now. $20 SOLD SOLD SOLD
8. Vixen GP/GPD/GPD2 and maybe EQ5 slow mo handles. $10 SOLD SOLD SOLD
Some additional photos pertaining to above items to follow
9. Vixen or others tripod screw - LONG - $10 {SOLD to Poops}
10. Vixen GP/GPD/GPDX/GPD2 worm screw. New, never taken out of wrap ex-Vixen Japan. $20
11. Vixen or others SHORT tripod screw $10 SOLD
12. Vixen/Skywatcher DEC/RA shims $5
13. Vixen 45-60 adaptors - convert the smaller 45mm EQ head spigot to the larger 60mm opening in most HAL130 tripods. 2 of these, never opened $20 EACH - BOTH SOLD
14. Vixen original plastic focuser wheels. $8 per pair (2 pair available - will NOT sell individually). 1 pair remaining
15. Vixen VISAC decal for the front of the spider of the VC-200L. Absolutely new. Cost me an arm and three legs. $10
16. Vixen 60-45 adaptor - converts from the smaller head 45mm hole tripods up to the larger 60mm EQ heads (opposite to 13 above). Not the best condition, but near impossible to buy now. One azimuth bolt position hole is boogered - could be rethreaded to a larger size. With aximuth peg. $20 SOLD DOLD SOL
NOTE: to stop confusion, please send me a PM with the number of item you want - I will then mark them off. Do NOT make any messages here. I will sell this according to time stamp in messages ONLY.