[WITHDRAWN] ATM components

[mental4astro (Alexander)]

I have a range of items available for ATM projects.

Teflon: 3mm and 4mm thick, cut to a sheet/block for you to machine and cut, or cut and machined to size.

Ebony Star: Cut to size straight edge or round/ring.

Price on the two above depends on the size of piece and the amount of machining needed.

25mm Star pole end plugs: M8 thread with a 25mm end disc, NOT 1inch as Al tubing in Australia is typically supplied as metric, $3.00 each.

Post additional on all items.

[mental4astro (Alexander)]

Listing just about to fall off to the Archives. Moving it back up as these components are still available and this 'bump' will keep the ad active for another couple of months,

[mental4astro (Alexander)]

Teflon prices

3mm Teflon strip, 25mm X 160mm, & 14 countrsunk screws to suit (for seven pads), $25 including post - for smaller projects

Set of four 3mm Teflon pads, 25mm X 15mm, drilled & countersunk and 8 countersunk screws, $40 incl post

Set of three 3mm Teflon pads, 25mm X 25mm, drilled, countersunk and 6 countersunk screws, $35 incl post.

Set of seven Teflon pads as above and screws, $70 incl post.


3mm Teflon strip, 40mm X 230mm, & 14 countersunk screws (for seven pads), $50 incl post - for larger projects

Other sizes of strips and machined pads to your requirements possible, just ask.

Teflon is virgin material.