Is this will work with my mount?

[hubble2140]

hello everyone!

i have the eq6r pro mount and one of my altitude bolts was ruined... is this bolts will work? https://www.aliexpre...earchweb201603_



does the eq6r pro have M8 or M10 bolts? and 80 millimeters will be enough?

thank you so much!!!

[that_guy (Tony)]

broken link mate

[hubble2140]

oh! sorry my bad
i add a screenshot of it, hope this work
thanks!

[glend (Glen)]

It looks like the bolts I used on my NEQ6.

[bojan]

Is it long enough?

[hubble2140]

Well, I don't know if it's long enough, but I just wanted to know which one I need to buy to my mount...
Glend: the NEQ6 and the eq6r pro have the same botls? You have M10?

[sunslayr (David)]

My NEQ6 uses M10 1.5mm Pitch threads.

[Startrek (Martin)]

I own 2 off EQ6-R mounts
Just measured the long Altitude bolt with the Spring loaded thumb lever
Using a metric rule 1:1 scale
Outside diameter of altitude bolt including thread was 15.5mm
Diameter less thread as 13.5mm
So it’s either an M15 or M16 ???

Hope that helps ?

[hubble2140]

my screw from my supplier is ready so i will ask him (if the screw is good!), what is the M number of the screw!
its sound that m15 or m16 will work!
thanks!!!!!!!!!!!!!

[Gabriel.V (Gabriel)]

How about a cardan screw?



https://www.testar.com.au/collection...dan-screw-neq6

[hubble2140]

it looks excellent! agenna astro also selling like this and i asked them if they are good for the eq6r pro.
i got my screw from my supplier finally! its M16!
thanks for all the help guys!!!!!!!!