Dobsonian bits for somebody on a very tight budget!
The tube is 1245 mm long by 360 mm diameter, solid and heavy!
It has been 'modified' several times, but is baffled etc.
Secondary mirror is 70 mm short axis, 100 mm long axis, and in good condition.
The spider and secondary cell fit the 360 mm tube.
The primary mirror is 10", 245 mm in diameter, F5.5 (?), old and imperfect, as the pictures show.
There is a small 10 mm chip on the rim under the clip holding the mirror.
There are some blemishes and marks, but it is definitely usable.
The primary mirror cell has been 'modified' so that it fits the 360 mm tube.
The mount was a bit embarrassing so it went to the tip!
If I were to get $150 for the lot I would be very happy.
I really want to sell as a job lot, but if it doesn't sell then we can talk.
Inspection and pick up welcome in Clifton Springs down on the Bellarine Peninsula.
I might be persuaded to deliver to Melbourne, but not the outer suburbs.
Sale pending, subject to pickup and payment, thanks Gary!
