alternatives for timing belts PMX?

[graham.hobart (Graham stevens)]

Hi
Seeing as the replacement 30$ US timing belts on the software bisque site for the PMX mount are then 95US post + tax = 150US !!!
are there any other manufacturers you can use ? the thread and pitch are given in the blurb on the site more information is available for this product ?

SDP-SI.com Part Number:

A 6B16-100025

Unit:

Inch

Belt Type:

Single Sided

Pitch:

.080" (MXL)

No. Of Grooves:

100

Belt Width:

1/4"

Material:

Urethane

Tension Member:

Kevlar

Pitch Length:

8.00"

[cfranks (Charles)]

I get mine from www.smallparts.com.au in Queensland and they usually have them in stock.

Charles

[gregbradley]

I'd ask them to send you one for free as they were out of line putting the cheapo defective belt in their expensive PMX in the first place.

Wouldn't it have to be set to an exact length?

Greg.

[AndrewJ]

Gday Greg

Wouldn't it have to be set to an exact length?

If you get a belt of the same tooth pitch/profile ie 0.080"(MXL) and the same tooth count ie 100, it will be the correct length.

Andrew

[Logieberra (Logan)]

I purchased MX belts in Aus. The newer grey kind (not black).

I had provided the details to another member on here, Chris Venter, but he never responded or said thanks!

Hit him up, as it's been many years, and I no longer have my order details.

[graham.hobart (Graham stevens)]

cheers all

[UniPol]

I had great success in buying belts for my workshop equipment with http://www.edingtonagencies.com.au/Power-Transmission

[graham.hobart (Graham stevens)]