#1  
Old 09-04-2010, 03:32 PM
BlackWidow's Avatar
BlackWidow (Mardy)
Seeing Stars

BlackWidow is offline
 
Join Date: Nov 2008
Location: Adelaide Australia
Posts: 610
Cool Guiding with Tucam and K3ccd Tools Help

It now begins...I have done the mod to my Tucam and have a reg version of K3ccdtools. I just have a Question in using it for guiding. I have plugged the camera into the USB port and have a good image. I also have a Parallel cord comming from the Tucam into a Parallel to USB converter. I have set the com ports for the Camera as Com2 (working) and the Parallel control cable to USB COM 3 (seems to be working).. Now here is the question??? Where does the Meade LX200 fit into the picture? Do I assume that I set the Guiding controll to LX200 Interface in the guiding settings. Then I guess I just plug the LX200 via the RS232 socets and all should be good..

I do understand that I need to run the Drift Explorer Etc, it's just the settings and cable connections I need to have confirmed...

I intend to use the guiding via an Off-Axis guider attached to the back of my De-Rotator and capture images via my DSLR...

Any help would be great. I don't have anyone near me to assist so this site is my bible. From a new nothing Guy some months ago I am happy with my progress, and have enjoyed building my gear and modding Cams etc..


Regards
Mardy
Reply With Quote
  #2  
Old 09-04-2010, 04:49 PM
[1ponders]'s Avatar
[1ponders] (Paul)
Retired, damn no pension

[1ponders] is offline
 
Join Date: Nov 2004
Location: Obi Obi, Qld
Posts: 18,778
Martin, is there a particular reason for using K3? I used it for a number of years for guiding and I found it very hit and miss. Or maybe it was me or my mount, but I struggled to obtain consistent results. When PHD came along I never looked back.

I'm a big fan of K3 but its guiding setup could be a bit more intuitive.

As for you current prob I never used a long exposure ToUcam. If you have your camera set to Normal Camera in the settings you may be able to do away with the parallel port. My setup was normal Toucam, usb connection, serial connection from mount to serial/usb converter to laptop and that was it. I did find some of the USB/Serial converters a bit hit and miss though
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 01:35 PM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Advertisement
Meade Australia
Advertisement
SkyWatcher Australia
Advertisement
NexDome Observatories
Advertisement
Bintel
Advertisement
Lunatico Astronomical
Advertisement
OzScopes Authorised Dealer
Advertisement
Celestron Australia
Advertisement
Astronomy and Electronics Centre
Advertisement