#1  
Old 03-10-2018, 06:16 AM
garymck (Gary)
Registered User

garymck is offline
 
Join Date: Aug 2005
Location: Geelong
Posts: 788
DIY Focuser Rotator

Hi,
not sure whether to put this here or in the ATM section, but since I'll be using it for imaging thought here would be OK.

I'm currently building a motorised focuser rotator for my Esprit 100mm. The inspiration came from this web site:

http://www.scopefocus.info/home/rotator

The software is Ascom compatible, free, and the electronics are Arduino.

Cost so far:
$225 for secondhand Tak CAA (thanks LewisM)
$50 for the stepper
already had the Arduino stuff, but say about $12
$65 for aluminium - had to buy billets as tubing is not available in required size
A few cents for 3d print materials for a ring gear
$20 for timing belts and pulleys for the motor

Also have to buy lunch for my machinist friend who did the work making adapters (scopey - Les)

At this stage the adapters are made, electronics builtt and tested. Ring gear fitted. Currently waiting for timing pulleys/belt to arrive from Banggood.

Kevin, the designer and web page owner is a terrifically helpful guy. After finishing the adapters, I contacted him yesterday requesting a different ring gear size. He had it done and the stl file in my mailbox in a couple of hours.

If there is any interest, I'll provide adapter details and follow up pics on completion after the pulleys arrive.

cheers
Gary

see Pic attached
Attached Thumbnails
Click for full-size image (focuser small.jpg)
42.2 KB71 views
Reply With Quote
  #2  
Old 03-10-2018, 06:42 PM
jwoody's Avatar
jwoody (Jeremy)
Registered User

jwoody is offline
 
Join Date: Aug 2011
Location: Ormeau Hills, Australia
Posts: 370
Gday Gary
That looks good
I made one of Kevin's rotators also, very good indeed.
Good luck
Jeremy
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 01:26 PM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Advertisement
Testar
Advertisement
Bintel
Advertisement