#1  
Old 21-11-2019, 08:31 AM
Swagman105's Avatar
Swagman105 (Geoff)
swagman105

Swagman105 is offline
 
Join Date: Jun 2014
Location: Highton, Victoria, Australia.
Posts: 82
Nuts, bolts and screws

Am lucky to have a bush property where I keep half my astro gear, but still find myself moving gear between there and home a lot.
I seem to be forever losing or leaving behind or sometimes damaging nuts, bolts and screws.
I know its a quite general question but does anyone know of a good single site for ordering generic replacements or indeed upgrades for these nuts, bolts and screws etc rather than trying to order small single specific items from the original manufacturers.
Reply With Quote
  #2  
Old 21-11-2019, 08:42 AM
bojan's Avatar
bojan
amateur

bojan is offline
 
Join Date: Jul 2006
Location: Mt Waverley, VIC
Posts: 6,932
Bunnings....
Reply With Quote
  #3  
Old 21-11-2019, 08:47 AM
Startrek (Martin)
Registered User

Startrek is offline
 
Join Date: Dec 2017
Location: Sydney and South Coast NSW
Posts: 5,990
I buy all my Astro fixing hardware etc... from Bolts and Industrial Supplies , they are a national supplier. prices are ok but not the cheapest. I use them as they have everything in every size and usually in stock
www.bolt.com.au
Melbourne phone number 1300 852 338
I’ve ordered quantities of bolts , nuts , washers both in mild steel , galvanised and stainless as low as 5 of each and they will supply ( but you still pay same delivery charge for 5 or 50 though )
Hope the above helps
Reply With Quote
  #4  
Old 21-11-2019, 08:54 AM
AstroApprentice (Jason)
Registered User

AstroApprentice is offline
 
Join Date: Dec 2015
Location: Melbourne, Australia
Posts: 349
Bolt King

I have used Bolt King a lot
https://boltking.com.au/
Small quantities can be ordered on their eBay site and they ship quickly.
https://www.ebay.com.au/str/boltkingonline
Reply With Quote
  #5  
Old 21-11-2019, 09:21 AM
Pepper (Steve)
Registered User

Pepper is offline
 
Join Date: Dec 2018
Location: Daruka
Posts: 394
Try a local nut and bolt distributor. At our local, if you only need a couple at screws they will just give em to ya.
Bunnings May have a good range, but damn their nuts and bolts are expensive!
Reply With Quote
  #6  
Old 21-11-2019, 10:36 AM
Startrek (Martin)
Registered User

Startrek is offline
 
Join Date: Dec 2017
Location: Sydney and South Coast NSW
Posts: 5,990
IMO Bunnings have a limited range of fasteners , especially in the small quantity packets
I was after some M8 and M6 stainless Allen key head cap screws for my losmandy bars and tried 2 Bunnings both had nothing.Also some other items like spring washers and Star washers in stainless , once again they had nothing
I still visit Bunnings from time to time but not for fixing hardware
That’s why I went to a company like Bolts and Industrial, they have everything in all sizes and finishes
My 2 cents.......
Reply With Quote
  #7  
Old 21-11-2019, 10:50 AM
taminga16's Avatar
taminga16 (Greg)
Registered User

taminga16 is offline
 
Join Date: Feb 2007
Location: Maldon. VIC
Posts: 855
Bolts and Fasteners Bendigo. sales@boltfast.com.au
Reply With Quote
  #8  
Old 21-11-2019, 11:12 AM
Wavytone
Registered User

Wavytone is offline
 
Join Date: Jul 2008
Location: Killara, Sydney
Posts: 4,147
Accu.co.uk have an extensive range, nice prices and no order is too small - even tiny grub screws. A small order may take 2 weeks to arrive as it will be by post.

Let the fingers do the walking - easier than driving to Bunnings, and it’s not worth wasting a day driving across Sydney and back for a few stainless metric nuts and bolts.

Last edited by Wavytone; 21-11-2019 at 11:25 AM.
Reply With Quote
  #9  
Old 21-11-2019, 12:30 PM
Rainmaker's Avatar
Rainmaker (Matt)
Strictly Visual......

Rainmaker is offline
 
Join Date: Jun 2019
Location: Canberra
Posts: 581
I get everything from Specialty Fasteners.......
Reply With Quote
  #10  
Old 21-11-2019, 02:14 PM
Merlin66's Avatar
Merlin66 (Ken)
Registered User

Merlin66 is offline
 
Join Date: Oct 2005
Location: Junortoun Vic
Posts: 8,904
MBA Miniature Bearings Australia have looked after my needs since I came back.
Good selection and very help full (also timing belts and pulleys)
https://www.minibearings.com.au/stor...gories/?v=3792
Reply With Quote
  #11  
Old 22-11-2019, 07:45 AM
Swagman105's Avatar
Swagman105 (Geoff)
swagman105

Swagman105 is offline
 
Join Date: Jun 2014
Location: Highton, Victoria, Australia.
Posts: 82
Thanks everyone for their input on this.
I will keep this thread as a resource list.
Off forum I have also been made aware that an AliExpress search "stainless steel screws" or "Hercules thumb screws"will also bring up some interesting options.
Handy but if you want something now not as useful as local.
Reply With Quote
  #12  
Old 22-11-2019, 07:50 AM
Pepper (Steve)
Registered User

Pepper is offline
 
Join Date: Dec 2018
Location: Daruka
Posts: 394
ill vouch for minature bearings Australia.
just bought some belts of them. super fast to regional nsw..
Reply With Quote
  #13  
Old 01-12-2019, 07:18 AM
Swagman105's Avatar
Swagman105 (Geoff)
swagman105

Swagman105 is offline
 
Join Date: Jun 2014
Location: Highton, Victoria, Australia.
Posts: 82
Another source for telescope bits and pieces

Just adding to my own post, I have also been made aware of an American site called appropriately "Scopestuff" which has lots of bits and pieces, screws and maybe hard to get things for different mounts and scopes.
Search " scopestuff.com"
Reply With Quote
  #14  
Old 01-12-2019, 07:58 AM
alval (Alan)
Registered User

alval is offline
 
Join Date: Jun 2017
Location: Northern Adelaide
Posts: 73
I do an ebay search first now, most of the places like bolt and nut and fastener warehouse have listings and stores as well as international stores, and postage is generally pretty quick for small stuff. The key is to get the right description and terminology for what you are looking for, like cheesehead, socket head, roundhead, thumbscrew, etc. The greatest advantage using this method is they usually have options for varying amounts. I build model engines and have found harder to get smaller nuts and screws. Which if going through a place like Universal or Colmark fasteners will get it in for you but because its not a regular item will only sell them by the box.
Al
Reply With Quote
  #15  
Old 01-12-2019, 08:18 AM
Swagman105's Avatar
Swagman105 (Geoff)
swagman105

Swagman105 is offline
 
Join Date: Jun 2014
Location: Highton, Victoria, Australia.
Posts: 82
Al I think you are right about getting descriptions and terminology right for this sort of stuff. I only wish astro gear manufacturers would somehow identify what are the specs of their fasteners. I have a lot of trouble identifying screw and bolt sizes Metric or imperial? TPI for something that is missing and as you say terminology - I had never heard of "cheesehead". I suppose in the end it may be a good idea just to tote the whole mount or piece of gear around to the local fastener place and try out something for fit.
Reply With Quote
  #16  
Old 01-12-2019, 08:37 AM
alval (Alan)
Registered User

alval is offline
 
Join Date: Jun 2017
Location: Northern Adelaide
Posts: 73
I think the majority of stuff is metric from europe and japan, even meade uses metric threads. But then there is standard and fine. I know bunnings has a board with metric, whitworth and unc etc, male and female threads to try before you buy so to speak to find the right thread, or you could always get a cheap set of thread pitch gauges off ebay. Measure the OD then thread pitch and you’ll know what you need.
Reply With Quote
  #17  
Old 01-12-2019, 08:58 AM
Swagman105's Avatar
Swagman105 (Geoff)
swagman105

Swagman105 is offline
 
Join Date: Jun 2014
Location: Highton, Victoria, Australia.
Posts: 82
Al my wife sends you her thanks because I just ordered a thread pitch gauge on ebay.
Reply With Quote
  #18  
Old 01-12-2019, 08:59 AM
alval (Alan)
Registered User

alval is offline
 
Join Date: Jun 2017
Location: Northern Adelaide
Posts: 73
Not sure if the photo is legible, but with a cheap set of verniers and thread gauges off ebay you can work out any standard threads your are likely to encounter with this chart. Sits on my wall in the shed.
Attached Thumbnails
Click for full-size image (3A1ADAC6-BD00-4F87-956E-6638E2E5CB3F.jpeg)
181.0 KB37 views
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 11:24 AM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Advertisement
Testar
Advertisement
Bintel
Advertisement