#1  
Old 13-10-2009, 09:04 PM
telecasterguru's Avatar
telecasterguru (Frank)
Have scope will travel!

telecasterguru is offline
 
Join Date: Jan 2009
Location: Pitnacree NSW
Posts: 1,491
DSI II and focus

I have spent a number of hours trying to get Jupiter to focus in my DSI II and have been singularly unsuccessful.
I am using a Bintel 252 Dob on an eq platform and no matter what settings I use all I get is a blown out blob.
I follow the instructions in the manual for planetary imaging. Gain, offsets no matter what I try it won't become clear. It is perfectly clear with an EP.

Any suggestions greatly appreciated.

Frank
Reply With Quote
  #2  
Old 13-10-2009, 10:03 PM
[1ponders]'s Avatar
[1ponders] (Paul)
Retired, damn no pension

[1ponders] is offline
 
Join Date: Nov 2004
Location: Obi Obi, Qld
Posts: 18,778
Try a focusing aid on a star first. Try a simple hartmann mask and see if you can focus on a bright star.
Reply With Quote
  #3  
Old 14-10-2009, 07:04 AM
Dennis
Dazzled by the Cosmos.

Dennis is offline
 
Join Date: May 2005
Location: Brisbane
Posts: 11,704
Hi Frank

Assuming that you can achieve focus with the DSI on stars as Paul suggested, I think that the DSI is a very sensitive camera compared to typical webcams such as the DMK series so if you are imaging Jupiter at the prime focus I suspect that you are just saturating the chip, which is why you can’t see any details.

You should be able to see the Galilean moons though, if they are a reasonable distance from the disc?

I have an SBIG ST7 and the shortest exposure it takes is 0.01 sec and that also blows Jupiter out at the prime focus of my ‘scope, until I insert a Barlow which increases the magnification and consequently dims the image and I can then see the cloud belts.

Webcams are the preferred cameras for imaging Jupiter due to their ability to grab between 100’s and 1000’s of frames for stacking.

Cheers

Dennis
Reply With Quote
  #4  
Old 14-10-2009, 09:30 AM
telecasterguru's Avatar
telecasterguru (Frank)
Have scope will travel!

telecasterguru is offline
 
Join Date: Jan 2009
Location: Pitnacree NSW
Posts: 1,491
Thanks for the info. I have tried a 2x and a 5x barlow to no avail. The DSI II has a planetary setting which I assume is different to it's DS settings. Its very strange that when I look at the image of Jupiter standing straight in front of the computer screen it is a blob but when I move to the side and look at the monitor from a side on angle it looks in focus. Why would this be? I'm sure I'm doing something wrong.

Frank
Reply With Quote
  #5  
Old 14-10-2009, 09:43 AM
allan gould's Avatar
allan gould
Registered User

allan gould is offline
 
Join Date: May 2005
Location: Brisbane
Posts: 4,485
You have to set the exposure of the DSI II to ~1/1000 of a second to get Jupiter anything else than a blob. At too high an exposure its just a huge circle of light. For focus us a Bahtinov mask on a bright star then go to Jupiter without touching your focus, set exposure to 1/1000 sec and you will see the bands.The DSI II is very sensitive.
Reply With Quote
  #6  
Old 14-10-2009, 09:53 AM
telecasterguru's Avatar
telecasterguru (Frank)
Have scope will travel!

telecasterguru is offline
 
Join Date: Jan 2009
Location: Pitnacree NSW
Posts: 1,491
Allan,

I will have another go again tonight. I believe the exposure was set to .008 seconds. I will drop it down to .001. Auto exposure didn't seem to produce any results at all.

Thanks

Frank
Reply With Quote
  #7  
Old 14-10-2009, 10:23 AM
Dennis
Dazzled by the Cosmos.

Dennis is offline
 
Join Date: May 2005
Location: Brisbane
Posts: 11,704
Hi Frank

In terrestrial cameras, auto exposure is (generally) not suited to astronomical scenes. Auto exposure algorithms attempt to integrate the tones in a scene and average them out to a mid-grey. On my Canon 40D this works very well on most day time scenes where there is a nice spread of tones from blacks through greys through whites.

With Jupiter, all you have is a black sky and a white blob for the planet with few (none?) in-between tones so this fools the exposure meter which then over exposes when it “sees” all that black and attempts to let more light in, to lighten the blacks to make them approach a tonal value of mid-grey.

Cheers

Dennis
Reply With Quote
  #8  
Old 14-10-2009, 12:17 PM
White Rabbit's Avatar
White Rabbit
Space Cadet

White Rabbit is offline
 
Join Date: Feb 2007
Location: Sydney
Posts: 1,411
I know exactly what your talking about. It's pain in the @#$$ trying to fucus that camera. I do it with the moon and still I can never get looking sharp, there always seems to be a softness to the focus. I've tried with refractors and newts, same thing.

I havent got a mask though, thats next on my list. Hopefully that will make it easier.

Sandy
Reply With Quote
  #9  
Old 14-10-2009, 12:42 PM
pvelez's Avatar
pvelez (Pete)
Registered User

pvelez is offline
 
Join Date: Aug 2006
Location: Sydney
Posts: 1,250
Frank

I bought a second-hand DSI II recently. The best move I made was to buy Nebulosity from Craig Stark. It has a fine focus function which give a continuous FWHM readout that makes focussing so much easier.

It works better on stars than Juppiter but it will make a difference.

Let me know if you need the link.

Pete
Reply With Quote
  #10  
Old 14-10-2009, 01:04 PM
telecasterguru's Avatar
telecasterguru (Frank)
Have scope will travel!

telecasterguru is offline
 
Join Date: Jan 2009
Location: Pitnacree NSW
Posts: 1,491
Pete,

That is a great idea as I already have nebulosity2. I never thought to use it.

Frank
Reply With Quote
  #11  
Old 14-10-2009, 03:34 PM
allan gould's Avatar
allan gould
Registered User

allan gould is offline
 
Join Date: May 2005
Location: Brisbane
Posts: 4,485
Envisage works well with a Bahtinov mask and focusing. Just increase the levels (LHS control) til you see the spikes and take it from there. Far better than Nebulosity's fine focus (in my experience). Cant take the time to make a Bahtinov mask? then just take 3 pieces of tape or string and place them across the front of your scope in a Y - easiest thing to do.
Reply With Quote
  #12  
Old 14-10-2009, 06:44 PM
bmitchell82's Avatar
bmitchell82 (Brendan)
Newtonian power! Love it!

bmitchell82 is offline
 
Join Date: Jul 2008
Location: Mandurah
Posts: 2,597
Ide go with nebulosity every time over envisage. IMHO envisage sucks badly. nebulosity allows you to frame, focus, take batch images and a whole lot more. make sure you have updated to the latest version.
Reply With Quote
  #13  
Old 14-10-2009, 07:01 PM
kinetic's Avatar
kinetic (Steve)
ATMer and Saganist

kinetic is offline
 
Join Date: Jun 2008
Location: Adelaide S.A.
Posts: 2,280
Quote:
Originally Posted by Dennis View Post
Assuming that you can achieve focus with the DSI on stars as Paul suggested....

Dennis
Frank,

As Dennis and Paul alluded to.....we are assuming this scope CAN
already bring things to focus?

My GSO Dob and most others, I assume, need the '50mm chop'
before I could bring something to focus (DSLR, DSII etc).
I followed Clive's (Alchemy) guide in the articles section on
how to do it to a 12" F5 Dob.

OK.....assuming your's already does focus ok, I found quite a few
weeks back that Jupiter and the DSI II needed a manual exposure
setting of 0.0005 sec in Nebulosity to bring surface features on
Jupiter in, perfectly exposed.
Anything slower and it blew out into a blob.

Hope this helps,

Steve
Reply With Quote
  #14  
Old 15-10-2009, 05:40 AM
telecasterguru's Avatar
telecasterguru (Frank)
Have scope will travel!

telecasterguru is offline
 
Join Date: Jan 2009
Location: Pitnacree NSW
Posts: 1,491
I have no problem focusing with my DSLR.
Unfortunately could not try anything last night and I am away now until Sunday. Will have a go with nebulosity then and let everyone know what happens.

I definitely do not want to give the scope the snip.

Frank
Reply With Quote
  #15  
Old 15-10-2009, 08:30 AM
White Rabbit's Avatar
White Rabbit
Space Cadet

White Rabbit is offline
 
Join Date: Feb 2007
Location: Sydney
Posts: 1,411
Quote:
Originally Posted by bmitchell82 View Post
Ide go with nebulosity every time over envisage. IMHO envisage sucks badly. nebulosity allows you to frame, focus, take batch images and a whole lot more. make sure you have updated to the latest version.

Agreed!!!
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 07:53 AM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Advertisement
Testar
Advertisement
Bintel
Advertisement