Go Back   IceInSpace > Equipment > Astrophotography and Imaging Equipment and Discussions

Reply
 
Thread Tools Rate Thread
  #1  
Old 08-02-2011, 09:25 AM
Stu Ward's Avatar
Stu Ward
Registered User

Stu Ward is offline
 
Join Date: Mar 2010
Location: wollongong
Posts: 523
What do i need to buy to attach a Canon 550D to a Skywatcher Dob

Title pretty much sums it up

If people can post links to bits and pieces i would very much appreciate it as i'm :

1) Lazy
2) Stupid and would probably buy the wrong one

Thanks

Stu
Reply With Quote
  #2  
Old 08-02-2011, 01:33 PM
troypiggo's Avatar
troypiggo (Troy)
Bust Duster

troypiggo is offline
 
Join Date: Nov 2008
Location: Brisbane, Australia
Posts: 4,811
An EOS adapter and T ring would get you connecting to the Dob directly. Some other things to consider, though:

- Will the focuser be able to take the weight? Might need to upgrade the standard one.
- If you're wanting to take long exposures, you'd be wanting to put it on an equatorial mount. Not sure if you already have one.
- Might (probably will) get coma, so consider a Baader MPCC or Televue Paracorr to correct that.
Reply With Quote
  #3  
Old 15-03-2011, 08:41 PM
robert82
Registered User

robert82 is offline
 
Join Date: Mar 2011
Location: nowra
Posts: 5
Hi mate i have the EOS550D and i got my T-ring from bintel.com.au cost me $35.00 the other thing that i had to do was shorten my 5" dob because it would not focus.
Reply With Quote
  #4  
Old 19-03-2011, 03:04 PM
jenchris's Avatar
jenchris (Jennifer)
Registered User

jenchris is offline
 
Join Date: Nov 2010
Location: Ormeau Gold Coast
Posts: 2,067
I believe it will just focus if you get a low profile focuser - and possible a barlow might enable it. But as said above - the tube may have to be shortened.
Connecting a DSLR @ prime focus on a Dob is not a common thing. Often the weight of the camera makes the tube head South, so counterweights are needed too.
Reply With Quote
  #5  
Old 19-03-2011, 04:14 PM
jjjnettie's Avatar
jjjnettie (Jeanette)
Registered User

jjjnettie is offline
 
Join Date: Feb 2005
Location: Far Far Away
Posts: 16,726
Check to see if the end of your focuser's draw tube is t-threaded. You never know your luck, you might get away with not having to cut the scope down.
RE. Balance. If you have a couple of old speakers hanging around the shed, salvage the magnets out of them. Get out the sewing machine and sew a couple of cotton bags for them so they don't scratch the paintwork of the OTA.
Reply With Quote
  #6  
Old 20-03-2011, 02:56 PM
mswhin63's Avatar
mswhin63 (Malcolm)
Registered User

mswhin63 is offline
 
Join Date: May 2009
Location: Bertram, Western Australia
Posts: 3,327
As you have a skywatcher DOB like me, the 1 1/4 inch adapter that is locked into the focuser can be unscrewed to insert the EOS adapter without the T-Ring.

This means you don't need to shorten the tube.

the T-ring is still used when using a Barlow
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 12:38 PM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Advertisement
Celestron Australia
Advertisement
NexDome Observatories
Advertisement
OzScopes Authorised Dealer
Advertisement
SkyWatcher Australia
Advertisement
Lunatico Astronomical
Advertisement
Meade Australia
Advertisement
Bintel
Advertisement
Astronomy and Electronics Centre
Advertisement