ICEINSPACE
Most Read Articles
Moon Phase
CURRENT MOON Waxing Crescent
7.5%
The Sun Now
Time Zones
Sydney*
12:56 am
Perth
9:56 pm
Auckland*
2:56 am
New York*
9:56 am
Paris*
3:56 pm
GMT
1:56 pm




  #21  
Old 12-10-2017, 05:38 PM
Numanoid (Jason)
Registered User

Numanoid is offline
 
Join Date: Sep 2017
Location: Brisbane
Posts: 17
Thanks for the advice.
I have seen 'plossl' a few time and I'm thinking the analogy is with the 'standard' (50mm) lens one would have on an SLR camera...right(?)

Quote:
Originally Posted by gaseous View Post
Yeah don't spend much on a "tester" eyepiece. You should be able to get a new entry level skywatcher 25mm plossl for peanuts. Just don't go lashing out on anything with "Televue" written on it at this stage....
Reply With Quote
  #22  
Old 12-10-2017, 05:40 PM
Numanoid (Jason)
Registered User

Numanoid is offline
 
Join Date: Sep 2017
Location: Brisbane
Posts: 17
Appreciate the advice - thanks!
This really is a first class forum! Everyone has been very helpful!

Quote:
Originally Posted by m11 View Post
Hi Numanoid,

Since you testing , i wouldnt spend alot. I would just get a low powered plossl due to the narrowier field of view. Maybe just get a second hand one for starters. They are some cheap ones listed for sale on this forum.

Mel
Reply With Quote
  #23  
Old 13-10-2017, 01:08 PM
jenchris's Avatar
jenchris (Jennifer)
Registered User

jenchris is offline
 
Join Date: Nov 2010
Location: Ormeau Gold Coast
Posts: 1,970
Fixed
Handbox ep26mm and a good clean
Just needs the handbox re programming. It seems to be locked on
eq format.
Reply With Quote
  #24  
Old 13-10-2017, 01:31 PM
m11 (Mel)
Registered User

m11 is offline
 
Join Date: Jan 2016
Location: melbourne
Posts: 170
Hi Jenchris,

Great update to hear.

Nice work.

Mel
Reply With Quote
  #25  
Old 13-10-2017, 03:13 PM
Numanoid (Jason)
Registered User

Numanoid is offline
 
Join Date: Sep 2017
Location: Brisbane
Posts: 17
A BIG shout out for JenChris!
Thanks for taking the time to explain things to me, clean and colliminating the Meade. Fascinating watching you in action!

I also loved seeing your photos which just got me soooo excited about what is possible.

Anyway, I was so eager to re-programme the handbox when I got home but noticed that the cable you kindly lent me doesn't quite fit. Very strange as I thought it would be a standard connection. But the 'clippy' bit looks a wee bit too big so can't slide into the handbox port.

I downloaded the ASU Autostar Suite to my laptop for updating the handbox once I figure the cable connection!

Regardless - this morning was a great learing experience and I really appreciate your time!


Quote:
Originally Posted by jenchris View Post
Fixed
Handbox ep26mm and a good clean
Just needs the handbox re programming. It seems to be locked on
eq format.
Reply With Quote
  #26  
Old 13-10-2017, 03:35 PM
AndrewJ
Registered User

AndrewJ is offline
 
Join Date: Mar 2006
Location: Melbourne
Posts: 1,581
Gday Jen
Quote:
Just needs the handbox re programming. It seems to be locked on eq format.
What kind of handbox and firmware was it????
Jason
If you have selected the model as LXD75, it will forcibly keep you as equatorial. Under setup telescope, just confirm what model is selected.
If it is LX90-<size>, then you should be able to swap between AltAz and Polar.
Also, re updating, i strongly suggest looking at using StarPatch
http://www.stargps.ca/downloads.htm
It is freeware and has more control over updating than Meades ASU.
It also allows you to interactively load our patches that fix some of the bugs and add some enhancements.
Re the upload cable, it should have a 4C4P connector on it for a 497
Dont just plug stuff in in hope if you arent sure.

Andrew
Reply With Quote
  #27  
Old 13-10-2017, 03:52 PM
Numanoid (Jason)
Registered User

Numanoid is offline
 
Join Date: Sep 2017
Location: Brisbane
Posts: 17
Hi Andrew,

Thanks for the link to StarPatch. truth be told, Jen did mention a better site than Meade's but my brain was overloaded with info so i just defaulted...

I think you are right on 4C4P, the cable Jen kindly lent seems to have 6 pins.

Cheers!
Jason

Quote:
Originally Posted by AndrewJ View Post
Gday Jen

What kind of handbox and firmware was it????
Jason
If you have selected the model as LXD75, it will forcibly keep you as equatorial. Under setup telescope, just confirm what model is selected.
If it is LX90-<size>, then you should be able to swap between AltAz and Polar.
Also, re updating, i strongly suggest looking at using StarPatch
http://www.stargps.ca/downloads.htm
It is freeware and has more control over updating than Meades ASU.
It also allows you to interactively load our patches that fix some of the bugs and add some enhancements.
Re the upload cable, it should have a 4C4P connector on it for a 497
Dont just plug stuff in in hope if you arent sure.

Andrew
Reply With Quote
  #28  
Old 13-10-2017, 04:48 PM
jenchris's Avatar
jenchris (Jennifer)
Registered User

jenchris is offline
 
Join Date: Nov 2010
Location: Ormeau Gold Coast
Posts: 1,970
That cable plugs into the handset and the usb into the laptop.
Yes the site was star patch.
Look in the manual for the correct cable in/out point.
I'm surprised if the handset was on lx75.
The one it came off was an lx90
I'm sure you'll sort it.
Reply With Quote
  #29  
Old 13-10-2017, 04:59 PM
jenchris's Avatar
jenchris (Jennifer)
Registered User

jenchris is offline
 
Join Date: Nov 2010
Location: Ormeau Gold Coast
Posts: 1,970
With setting the telescope type.
It's so long since ive done it that I'm thinking.
Setup. Easy downarrow one star downarrow two star etc til you get to
Telescope setup. I think.
Any way it's in the manual.
Reply With Quote
  #30  
Old 13-10-2017, 05:28 PM
Numanoid (Jason)
Registered User

Numanoid is offline
 
Join Date: Sep 2017
Location: Brisbane
Posts: 17
I'll figure it out.
But I can confirm that the handset port needs 4-pin and the cable you lent has 6-pin.
I have a photo of it not quite fitting but i need to shrink down to attach!

So not sure if the lx90 or lx75 controllers are different or which has 4-pin port.

Quote:
Originally Posted by jenchris View Post
That cable plugs into the handset and the usb into the laptop.
Yes the site was star patch.
Look in the manual for the correct cable in/out point.
I'm surprised if the handset was on lx75.
The one it came off was an lx90
I'm sure you'll sort it.
Reply With Quote
  #31  
Old 13-10-2017, 05:30 PM
Numanoid (Jason)
Registered User

Numanoid is offline
 
Join Date: Sep 2017
Location: Brisbane
Posts: 17
Will give that a go once I sort the firmware

Quote:
Originally Posted by jenchris View Post
With setting the telescope type.
It's so long since ive done it that I'm thinking.
Setup. Easy downarrow one star downarrow two star etc til you get to
Telescope setup. I think.
Any way it's in the manual.
Reply With Quote
  #32  
Old 13-10-2017, 05:37 PM
jenchris's Avatar
jenchris (Jennifer)
Registered User

jenchris is offline
 
Join Date: Nov 2010
Location: Ormeau Gold Coast
Posts: 1,970
You may not need to change the software. You may just be able to set it to lx90.
Reply With Quote
  #33  
Old 13-10-2017, 06:09 PM
Numanoid (Jason)
Registered User

Numanoid is offline
 
Join Date: Sep 2017
Location: Brisbane
Posts: 17
I think I will need to update software.
The Setup Order as per the Manual stops at "daylight saving (no)" interestingly and there is no option to select Scope Model.
"German South" appears after daylight saving.

All part of the learning curve!

Quote:
Originally Posted by jenchris View Post
You may not need to change the software. You may just be able to set it to lx90.
Reply With Quote
  #34  
Old 13-10-2017, 10:15 PM
jenchris's Avatar
jenchris (Jennifer)
Registered User

jenchris is offline
 
Join Date: Nov 2010
Location: Ormeau Gold Coast
Posts: 1,970
Yes but the next is setup.
Reply With Quote
  #35  
Old 14-10-2017, 06:42 AM
AndrewJ
Registered User

AndrewJ is offline
 
Join Date: Mar 2006
Location: Melbourne
Posts: 1,581
Gday Jason
Quote:
and there is no option to select Scope Model.
Dont worry about that too much yet.
The fact you are seeing "German South" indicates the handbox is currently set up for an LXD75.
Just start the mount and hit mode until you get to the main menus.
After getting to the main menu, select Setup>Telescope> and scroll through the options
One will be model, where you can select LX90
Next will be Mount where you can select AltAz or Polar
Then hit mode back to the main menus and scroll to utilities
In that menu is a statistics section, and under that, you can see what firmware version is loaded. Report back on what it says and we can point you to the latest firmware ( if reqd )
Then study up on drive training ;-)
Andrew
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 11:56 PM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Advertisement
SkyWatcher Star Discovery
Advertisement
Bintel
Advertisement
OzScopes Authorised Dealer
Advertisement
Meade Instruments
Advertisement
FLI Cameras and Imaging Accessories
Advertisement
Tasco Australia
Advertisement
Atik 16200
Advertisement
Lunatico Astronomical
Advertisement
Astronomy and Electronics Centre
Advertisement