Go Back   IceInSpace > IceTrade Classifieds > IceTrade Archives

 
 
Thread Tools Rate Thread
  #1  
Old 05-12-2019, 02:33 PM
Stefan Buda
Registered User

Stefan Buda is offline
 
Join Date: Jul 2013
Location: Melbourne, VIC
Posts: 823
Lots of Bahtinov masks

Over the last few years I designed many masks for telephoto lenses and refractors that were needed by various people. Every time I had a request for a mask, I printed an extra one or two in case I get a repeat request and so I ended up with a box full of masks. They range from 55 to 145 mm locating diameter. All are designed to locate on the inside diameter of the dew shield or lens hood, or filter thread.

If you have a need for a mask in this ball park, then send me your measurement and I'll let you know if I have one that fits.

The smaller ones you can have for $15 including postage, the larger ones are $25 including postage.
Attached Thumbnails
Click for full-size image (BahtinovMask.JPG)
194.2 KB633 views
  #2  
Old 07-12-2019, 02:51 PM
multiweb's Avatar
multiweb (Marc)
ze frogginator

multiweb is offline
 
Join Date: Oct 2007
Location: Sydney
Posts: 22,060
PMd
  #3  
Old 08-12-2019, 09:45 PM
Bluknghtv's Avatar
Bluknghtv (Daniel)
Registered User

Bluknghtv is offline
 
Join Date: May 2018
Location: Burrill Lake nsw Australia
Posts: 55
I cant find one that will fit my 305mm
skywatcher quattro newt
  #4  
Old 09-12-2019, 07:00 AM
Stefan Buda
Registered User

Stefan Buda is offline
 
Join Date: Jul 2013
Location: Melbourne, VIC
Posts: 823
Daniel,

If you can't source one over the next couple of months, contact me again and I may be able to help because by then I will have a CNC router that should be able to cut diameters of up to 310mm.
  #5  
Old 09-12-2019, 12:33 PM
eski (Simon)
Registered User

eski is offline
 
Join Date: Aug 2019
Location: Heathridge
Posts: 1
pm'd
  #6  
Old 12-12-2019, 05:53 PM
Bluknghtv's Avatar
Bluknghtv (Daniel)
Registered User

Bluknghtv is offline
 
Join Date: May 2018
Location: Burrill Lake nsw Australia
Posts: 55
Quote:
Originally Posted by Stefan Buda View Post
Daniel,

If you can't source one over the next couple of months, contact me again and I may be able to help because by then I will have a CNC router that should be able to cut diameters of up to 310mm.
COOL thanks mate.
  #7  
Old 21-12-2019, 01:39 PM
jrm_astro's Avatar
jrm_astro (John)
Registered User

jrm_astro is offline
 
Join Date: Oct 2019
Location: Wynnum, QLDt
Posts: 9
Pm'd

Cheers
  #8  
Old 01-01-2020, 07:47 AM
Rickstargazer (Richard)
Registered User

Rickstargazer is offline
 
Join Date: Jun 2019
Location: LITTLE MOUNTAIN, AUSTRALIA
Posts: 0
Hi Stefan, I have a skywatcher Evostar ED72, would you have a mask to suit? Thanks, Rick
  #9  
Old 01-01-2020, 06:48 PM
Stefan Buda
Registered User

Stefan Buda is offline
 
Join Date: Jul 2013
Location: Melbourne, VIC
Posts: 823
Hi Richard,

I have a number of designs to fit various refractors from 60 to 127 aperture, but you need to measure the inner diameter of the dew shield so that I can pick something that will fit nicely.
  #10  
Old 04-01-2020, 04:04 PM
Rickstargazer (Richard)
Registered User

Rickstargazer is offline
 
Join Date: Jun 2019
Location: LITTLE MOUNTAIN, AUSTRALIA
Posts: 0
Ed72

Quote:
Originally Posted by Stefan Buda View Post
Hi Richard,

I have a number of designs to fit various refractors from 60 to 127 aperture, but you need to measure the inner diameter of the dew shield so that I can pick something that will fit nicely.
The ID of the dew shield is 88mm
  #11  
Old 04-01-2020, 05:08 PM
Stefan Buda
Registered User

Stefan Buda is offline
 
Join Date: Jul 2013
Location: Melbourne, VIC
Posts: 823
I have one of those, so if you PM me a delivery address I will send it off on Monday.
  #12  
Old 05-01-2020, 10:19 AM
Rickstargazer (Richard)
Registered User

Rickstargazer is offline
 
Join Date: Jun 2019
Location: LITTLE MOUNTAIN, AUSTRALIA
Posts: 0
88mm Mask

Hi Stefan,

That would be great, can you message me on 0411033363 with amount and bank details so I can deposit funds.
Will reply with address.

Thanks,
Rick.
  #13  
Old 09-01-2020, 10:42 PM
nickkantore (Nishchay)
Registered User

nickkantore is offline
 
Join Date: Jan 2019
Location: Perth
Posts: 0
Hello Stefan

Can you do one for Celestron 8inch SCT.

Let me know thanks
  #14  
Old 10-01-2020, 07:46 AM
Stefan Buda
Registered User

Stefan Buda is offline
 
Join Date: Jul 2013
Location: Melbourne, VIC
Posts: 823
Quote:
Originally Posted by nickkantore View Post
Hello Stefan

Can you do one for Celestron 8inch SCT.

Let me know thanks
My printer limits the diameter to just below 6" but in a month or so my new CNC router should be ready and with that I will be able to go up to 310mm diameter.
  #15  
Old 13-01-2020, 07:50 PM
nickkantore (Nishchay)
Registered User

nickkantore is offline
 
Join Date: Jan 2019
Location: Perth
Posts: 0
Great thank you
  #16  
Old 17-01-2020, 10:55 AM
lodagoda (Khaled)
Registered User

lodagoda is offline
 
Join Date: Jul 2010
Location: Melbourne, Australia
Posts: 8
I would also be looking at 9'25inch SCT.
  #17  
Old 17-01-2020, 11:36 AM
BlakPhoenix (Rohan)
Astro With RoRo

BlakPhoenix is offline
 
Join Date: Jan 2019
Location: Sydney
Posts: 25
Adding to this that I'd be very keen for one for my SkyWatcher 190mm Mak-Newt once your new CNC is up and running.
  #18  
Old 22-02-2020, 08:40 AM
Stefan Buda
Registered User

Stefan Buda is offline
 
Join Date: Jul 2013
Location: Melbourne, VIC
Posts: 823
Sold a few, many left.
Have not had the time to get the new CNC wired up yet.
  #19  
Old 22-02-2020, 11:17 AM
johnnyjetski (John)
Registered User

johnnyjetski is offline
 
Join Date: Mar 2013
Location: Ardlethan NSW 2665
Posts: 75
PM sent
  #20  
Old 15-04-2020, 01:49 PM
Wussell's Avatar
Wussell (Russell)
Registered User

Wussell is offline
 
Join Date: Sep 2012
Location: Perth
Posts: 72
William Optics Zenithstar 70ed

Hello Stefan,

I am looking for a mask to suite a William Optics Zenithstar 70ed

Russell
 

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 06:48 PM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Advertisement
Bintel
Advertisement
Testar
Advertisement