Go Back   IceInSpace > Equipment > ATM and DIY Projects

Reply
 
Thread Tools Rating: Thread Rating: 12 votes, 4.92 average.
  #261  
Old 12-05-2016, 05:35 PM
croweater (Richard)
Don't Panic!

croweater is offline
 
Join Date: Feb 2015
Location: Mount Gambier, South Australia
Posts: 529
Good stuff Stephen. There's something about a round slab of glass! Also love your obviously well used grinding bench
Reply With Quote
  #262  
Old 13-05-2016, 10:05 AM
sopticals's Avatar
sopticals (Stephen)
Registered User

sopticals is offline
 
Join Date: Jun 2010
Location: Oamaru, New Zealand.
Posts: 226
Quote:
Originally Posted by Rac View Post
Is this 18 for yourself or someone else?
Was supposed to be one of six similar 18"ers for someone else local, but, there has been a "hiccup", so now maybe its headed somewhere else,(USA)?
Reply With Quote
  #263  
Old 14-05-2016, 12:35 PM
sopticals's Avatar
sopticals (Stephen)
Registered User

sopticals is offline
 
Join Date: Jun 2010
Location: Oamaru, New Zealand.
Posts: 226
Smile

Quote:
Originally Posted by croweater View Post
There's something about a round slab of glass!
Sure is. Getting more difficult to obtain good quality glass at a reasonable price.

Stephen.
Reply With Quote
  #264  
Old 02-06-2016, 06:38 AM
JuniorDave (David)
Registered User

JuniorDave is offline
 
Join Date: May 2016
Location: Waiheke Island
Posts: 5
Thought others may be interested.
Thanks to Stephen I have started working on a 365mm F3.something mirror.
Last nights rough grinding brought it below f4. With a 6mm sagitta.
I'm completely new to all of this. We got our first telescope a month and a half ago. A Nova 4inch reflector. Which I have now made a table top mount for.
To me I enjoy the challenge of being able to make something so perfect as a parabolic mirror only using the most basic of tools and tests.
Once I get to the end of fine grinding I plan to build the scope, or at least most of it so that I can test the mirror during polishing.
The glass isn't perfect, the back has two large chunks out of it, so no idea what the end quality will be. But it's all part of the learning process. Next piece of glass is also on its way from Stephen.
Attached Thumbnails
Click for full-size image (20160516_184303.jpg)
146.4 KB51 views
Click for full-size image (20160516_184846.jpg)
195.6 KB51 views
Click for full-size image (20160516_200044.jpg)
189.3 KB64 views
Reply With Quote
  #265  
Old 03-06-2016, 07:26 AM
sopticals's Avatar
sopticals (Stephen)
Registered User

sopticals is offline
 
Join Date: Jun 2010
Location: Oamaru, New Zealand.
Posts: 226
Smile

Hi David,

welcome "on board the mirror grinders merry-go-round". Watching with interest.

Stephen.
Reply With Quote
  #266  
Old 05-06-2016, 05:59 PM
JuniorDave (David)
Registered User

JuniorDave is offline
 
Join Date: May 2016
Location: Waiheke Island
Posts: 5
Rough grinding complete.
12hours, about 140 wets. about 20 wets per mm of sagitta.
at 365mm F3.3 shape. 1200mm focal length.
It's been a good learning experience. Although it has taken longer than it could have with other methods, I now have a very smooth curve that is looking really good with fine grinding. Past 120 and finishing up 220 now. Discovering how hard it is to gauge what tiny pits are from what grit.
Sure I will learn.

Thanks for the 3rd piece of glass Stephen. Will have to work out what I do with it.
I have decided the next project will be grinding the other side of my tool into a constant thickness 10 or 12 inch mirror. It will be quite thin. Maybe 20mm.
Reply With Quote
  #267  
Old 05-06-2016, 08:15 PM
sopticals's Avatar
sopticals (Stephen)
Registered User

sopticals is offline
 
Join Date: Jun 2010
Location: Oamaru, New Zealand.
Posts: 226
Smile

David,

The last rough cut blank, (one you have just received) you could tidy up by getting it water jet cut to 13",or thereabouts. Was 14 1/4" rough cut? So then it could be made into another mirror. Just my thoughts.

Stephen.
Reply With Quote
  #268  
Old 06-07-2016, 11:39 AM
sopticals's Avatar
sopticals (Stephen)
Registered User

sopticals is offline
 
Join Date: Jun 2010
Location: Oamaru, New Zealand.
Posts: 226
Smile Refurb Glass Tile tool

Needed to re-tile my 14" glass tile tool after working 3 by 18" to 24" mirrors.
Old tile depth down from 7-8mm original thickness to about 1.5-2mm, so obviously wouldn't have had a "dogs show" of lasting the distance grinding out my current 22"f3.5 mirror project.

As the curvature on the worn tool was near enough from previous project, an 18"f4, it was a simple matter to apply a commercial tile adhesive over the old surface, and lay on the new sheet of glass tiles.

The adhesive used normally dries in 24hr,(at 23degC), but because of the low winter temperature, took 3 days to cure. Just finished cleaning out the grooves, (between tiles), used tools seen, (old haksaw blade and paint brush).

See pics: including the 14" tool "astride" my 22" tool (used for 30"and 33" mirrors)

Stephen.
Attached Thumbnails
Click for full-size image (IMG_4191.jpg)
86.1 KB64 views
Click for full-size image (IMG_4195.jpg)
83.8 KB68 views
Click for full-size image (IMG_4198.JPG)
148.9 KB68 views
Click for full-size image (IMG_4199.jpg)
88.2 KB69 views

Last edited by sopticals; 06-07-2016 at 01:19 PM.
Reply With Quote
  #269  
Old 10-07-2016, 06:26 AM
Rac's Avatar
Rac (Raymond)
Registered User

Rac is offline
 
Join Date: Dec 2012
Location: Whangarei, New Zealand
Posts: 120
22" f3.5 sounds fun!

Your tile tools looks just like mine.
Reply With Quote
  #270  
Old 02-08-2016, 11:39 AM
sopticals's Avatar
sopticals (Stephen)
Registered User

sopticals is offline
 
Join Date: Jun 2010
Location: Oamaru, New Zealand.
Posts: 226
Smile

Quote:
Originally Posted by Rac View Post

Your tile tools looks just like mine.
I must be doing something right.
Reply With Quote
  #271  
Old 18-09-2016, 01:41 PM
sopticals's Avatar
sopticals (Stephen)
Registered User

sopticals is offline
 
Join Date: Jun 2010
Location: Oamaru, New Zealand.
Posts: 226
Finished the grind of 22"f3.5 (10mm sagitta). Silicon Carbide grits used #36 (Hog:with 7 3/4" 5kg cast iron barbell weight), #60, #120, #220, #400, #800 (using the 14" glass tile tool).

Stephen.
Attached Thumbnails
Click for full-size image (IMG_4256.JPG)
150.2 KB58 views
Reply With Quote
  #272  
Old 09-01-2017, 12:20 PM
nobby2's Avatar
nobby2 (Neil)
Registered User

nobby2 is offline
 
Join Date: Mar 2014
Location: Norah Head, Central Coast, NSW
Posts: 150
Beginning steps in mirror making

So much discussion in this thread it's difficult to find a starting point.
I have to convince myself I can test a mirror before buying a blank etc.

Just looking for confirmation that I am doing things correctly.

I have built a foucault tester based on the Stellafane model and have a silvered completed 8" GSO mirror to test.

From the attached images can anyone tell me if:
1. The position of the LED looks OK. Just above the slide hole for full passage of light to the mirror.
2. I have aligned the returned mirror reflection (small circle) back to the knife edge.
3. I have moved the knife edge to the radius of curvature (twice the focal length). On my mirror focal length 1200mm/47.244", f/5.9 making ROC at 94.49 inches.
4. I have observed the returned beam at its smallest and most focused to confirm its at ROC. I have moved the tester closer and further away from the ROC.

Problem is, I am not getting the expected shadow either side of ROC.
At exact ROC the light is very bright.
Is this to be expected when testing on a completed silvered mirror?
Attached Thumbnails
Click for full-size image (foucault tester 3.jpg)
158.9 KB49 views
Click for full-size image (closer view through tester to mirror.jpg)
159.8 KB44 views
Click for full-size image (past-knife-edge.jpg)
59.3 KB48 views

Last edited by nobby2; 10-01-2017 at 08:53 AM.
Reply With Quote
  #273  
Old 09-01-2017, 12:46 PM
nobby2's Avatar
nobby2 (Neil)
Registered User

nobby2 is offline
 
Join Date: Mar 2014
Location: Norah Head, Central Coast, NSW
Posts: 150
I have the same question as I just read on a previous post. Just completed a faucault tester and the exact position of the light source is not clear on many examples. Some use a torch light some distance to the side, some use a light on a fixed post separate to the knife edge. I have used a LED light as per the Stellafane models shining through the bottom, middle of the 2" slide hole close to the knife edge.

Last edited by nobby2; 09-01-2017 at 03:48 PM. Reason: I was expecting it as an answer to a specific thread and found it out alone with not explanation.
Reply With Quote
  #274  
Old 10-01-2017, 05:47 PM
sopticals's Avatar
sopticals (Stephen)
Registered User

sopticals is offline
 
Join Date: Jun 2010
Location: Oamaru, New Zealand.
Posts: 226
Simple Ronchi Tester

Hi nobby2 (Neil),to exploring the prospect of mirror making ATMing.

No body has chimed in at this point so thought it might be of interest to you to see a very simple rig made from scraps of ply, a 133LPI Ronchi screen, a cheap LED torch (has multiple LED's, covered all except one), a small piece of green cellophane wrapper paper, (through which I pass the LED beam), a few screws etc.

Pics: side view, front view, and a shot of Ronchi taken of my 33"f4.1 mirror,(still a work in progress). Photo of R-gram taken by free hand held Canon Power Shot A1200 digital camera.

I will let others show their test rigs for Foucault,(will be much more sophisticated than my simplistic Ronchi rig).

Stephen.
Attached Thumbnails
Click for full-size image (IMG_3721.JPG)
171.0 KB47 views
Click for full-size image (IMG_3724.JPG)
173.8 KB48 views
Click for full-size image (IMG_3446.JPG)
102.8 KB58 views

Last edited by sopticals; 10-01-2017 at 06:46 PM.
Reply With Quote
  #275  
Old 10-01-2017, 09:30 PM
nobby2's Avatar
nobby2 (Neil)
Registered User

nobby2 is offline
 
Join Date: Mar 2014
Location: Norah Head, Central Coast, NSW
Posts: 150
Thanks sopticals for your reply, much appreciated. Mirror making is obviously not a big thing in Australia. I think its time I moved on to the Ronchi Screen.
Did you make your Ronchi screen or order it. I notice the US publisher Willmann-Bell sells screens at various lines per inch. I read that 100 is a good starting point.
I Think I have the structure of the tester working OK, just looking for some confirmation that I have the basics sorted.
Attached Thumbnails
Click for full-size image (foucault tester 3.jpg)
158.9 KB37 views
Click for full-size image (closer view through tester to mirror.jpg)
159.8 KB31 views
Click for full-size image (past-knife-edge.jpg)
59.3 KB35 views
Reply With Quote
  #276  
Old 11-01-2017, 08:58 AM
dave brock's Avatar
dave brock
Registered User

dave brock is offline
 
Join Date: Dec 2011
Location: hamilton nz
Posts: 82
Hi Neil.
First off, don't get the willmann-Bell screens, they count the lines wrong and are 1/2 what they state. Get them from http://ronchiscreens.com/

With your tester, it's a bit hard to tell from your pics but the light seems in the correct position with the knife edge cutting 1/2 way over it. The return beam also needs to be cut into with the knife to get the shadow (above the light). Start say 1/2" inside where you think the RoC is and there should be a dark, sharp shadow coming from the same direction as the knife. Move the knife back until the shadow forms the doughnut pattern. Continue moving the knife back and the shadow will come in from opposite the knife.
A possible problem I can see is you need to have your eye right in close behind the knife edge which might be difficult with your set up.

Dave
Reply With Quote
  #277  
Old 11-01-2017, 09:04 AM
dave brock's Avatar
dave brock
Registered User

dave brock is offline
 
Join Date: Dec 2011
Location: hamilton nz
Posts: 82
One more thing.
It is brighter with a coated mirror but the shadows are just as visible and it can be troublesome if the coating is badly deteriorating or very dirty/dusty.

Dave
Reply With Quote
  #278  
Old 11-01-2017, 09:12 AM
dave brock's Avatar
dave brock
Registered User

dave brock is offline
 
Join Date: Dec 2011
Location: hamilton nz
Posts: 82
Quote:
Originally Posted by nobby2 View Post
On my mirror focal length 1200mm/47.244", f/5.9 making ROC at 94.49 inches.
The focal length of your mirror may not be exactly 1200mm. That is often a rounded off figure.

Dave
Reply With Quote
  #279  
Old 11-01-2017, 10:30 AM
nobby2's Avatar
nobby2 (Neil)
Registered User

nobby2 is offline
 
Join Date: Mar 2014
Location: Norah Head, Central Coast, NSW
Posts: 150
Thanks Dave. Just the information I was looking for. I can now move on and order the screens.
I was wondering if my silvered completed mirror was too reflective to get the shadow. It looks like I was doing all the correct things. Yes, every grain of dust makes viewing more difficult. Will have to try again with a closer eye to the knife edge. Much appreciated.
Reply With Quote
  #280  
Old 12-01-2017, 12:31 PM
OzEclipse's Avatar
OzEclipse (Joe Cali)
Registered User

OzEclipse is offline
 
Join Date: Jun 2012
Location: Young Hilltops LGA, Australia
Posts: 1,177
Hi Neil,

Foucault testers are generally illuminated to be bright enough for diffraction patterns to be visible on an un-silvered polished mirror - reflectivity 1-4%. A 96% mirror will therefore be very bright.

What you are seeing could be correct. I just can't tell from that photo. You could be seeing some minor un-eveness in the figure and a Foucault shadow. It's hard to tell from that photo.

My tester is a dual ronchi / Foucault tester based on Jean Texereau's original model. It uses a razor and a very fine brass mesh at each end of a rotating arm so you can position the ronchi grating or Foucault blade at the optical axis. Keep the light source and viewing point as close together and on the optical axis as possible. The horizontal strands have no optical effect because of the vertical slit over the light source only diffracts with the vertical strands of the mesh.

I'll post some pics of my tester when I get a chance.

There are many ways to determine the exact ROC. You can use the sun to determine the focal length with a piece of card attached to the end of a long stick. Point the stick toward the sun, slide the mirror along and mark the position on the stick where the suns image comes to a focus on the card. With your tester and a a silvered mirror, place a piece of tracing paper at the viewing point. Adjust the position of the tester until the slit comes into sharp focus.

Joe
Attached Thumbnails
Click for full-size image (Foucault_tester-0506.jpg)
181.8 KB46 views
Click for full-size image (Foucault_tester-0507.jpg)
169.0 KB47 views
Click for full-size image (Foucault_tester-0509.jpg)
66.4 KB44 views
Click for full-size image (Foucault_tester-0511.jpg)
180.8 KB41 views
Click for full-size image (Foucault_tester-0513.jpg)
93.2 KB41 views
Click for full-size image (Foucault_tester-0515.jpg)
74.9 KB43 views
Click for full-size image (Foucault_tester-0516.jpg)
172.5 KB41 views

Last edited by OzEclipse; 13-01-2017 at 02:53 PM. Reason: adding photos
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 08:27 PM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Advertisement
Testar
Advertisement
Bintel
Advertisement