#1  
Old 22-12-2013, 12:03 PM
pvelez's Avatar
pvelez (Pete)
Registered User

pvelez is offline
 
Join Date: Aug 2006
Location: Sydney
Posts: 1,250
PI Processing Tip - black spots

I have some quite nice data of M45 taken with the iTelescope FSQ106 in New Mexico. The Luminance data however has black spots - I suspect that I didn't set the L images to dither.

A screenshot is attached.

Any tips from the PI wizards on processing these out?

Pete
Attached Thumbnails
Click for full-size image (Screen Shot 2013-12-22 at 12.00.37 PM.png)
74.8 KB71 views
Reply With Quote
  #2  
Old 22-12-2013, 12:31 PM
h0ughy's Avatar
h0ughy (David)
DOGHOUSE REBORN

h0ughy is offline
 
Join Date: Apr 2005
Location: NEWCASTLE NSW Australia
Posts: 30,391
did you get a set of flats?

are they in those?
Reply With Quote
  #3  
Old 22-12-2013, 12:32 PM
RickS's Avatar
RickS (Rick)
PI cult recruiter

RickS is offline
 
Join Date: Apr 2010
Location: Brisbane
Posts: 10,581
I'd start by trying CosmeticCorrection on the original subs before you stack them. If you create a process icon with appropriate parameters you can invoke it from BatchPreprocessing so that it is done after calibration and before image registration.

Cheers,
Rick.
Reply With Quote
  #4  
Old 22-12-2013, 05:57 PM
DavidNg's Avatar
DavidNg (David)
Registered User

DavidNg is offline
 
Join Date: Apr 2011
Location: Sydney
Posts: 341
Hi,

I just used PS to remove those black spots. Took me 30s with Spot Healing Brush tools. PI might as well have some cosmetic touchup, I am afraid that it may also damage other structures if not masked properly.

Cheers
David
Attached Images
 
Reply With Quote
  #5  
Old 22-12-2013, 08:12 PM
cfranks (Charles)
Registered User

cfranks is offline
 
Join Date: Feb 2008
Location: Tungkillo, South Australia
Posts: 599
I feel you need to tell us what post processing you have done and let us look at the raw subs. The spots look fairly big so it might not be difficult to find the reason.

Charles
Reply With Quote
  #6  
Old 23-12-2013, 12:43 PM
Tony_ (Tony)
Registered User

Tony_ is offline
 
Join Date: Oct 2011
Location: Melbourne, Australia
Posts: 458
Hello Pete,

The spots look like an insect got into your camera. I get this occasionally.
If the spots are in the same position on all of your subs then it probably isn't an insect. If there is a single spot that moves about and some subs have no spots then it probably is an insect. If it is dust on your sensor you should be able to see it (maybe with a magnifying glass).

Regards,
Tony.
Reply With Quote
  #7  
Old 23-12-2013, 11:59 PM
troypiggo's Avatar
troypiggo (Troy)
Bust Duster

troypiggo is offline
 
Join Date: Nov 2008
Location: Brisbane, Australia
Posts: 4,790
As per Rick's advice, CosmeticCorrection in PI will get rid of them. I wrote a blog article on how to set up a CC template and also how to automatically add it into a custom Batch PreProcessing process icon.
http://piggo.com/2012/06/pixinsight-...-script-howto/
Reply With Quote
  #8  
Old 02-01-2014, 03:50 PM
pvelez's Avatar
pvelez (Pete)
Registered User

pvelez is offline
 
Join Date: Aug 2006
Location: Sydney
Posts: 1,250
Thanks everyone for the suggestions.

The images were taken using the iTelescope service in New Mexico. Images can be downloaded pre-calibrated or you can download the calibration frames and calibrate them yourself. I'm pretty lazy so I usually use the calibrated images.

Looking at the master flat more closely, it looks like the flats have not been combined properly or dithered. A screen shot shows the problem - looks like a single sky flat with the stars retained. Alternatively it could be hot pixels.

Anyway, the Cosmetic Correction tool is what I was looking for. I managed to remove most of the dodgy pixels and now have a reasonably clean image. A screen shot of the cleaned up affected area is attached.

I remain a PI novice - but each image encourages me to keep on learning. With this one its been both the CC tool and Star Halo Reducer script. I'll post the full image in the Deep Sky forum.

Thanks again

Pete
Attached Thumbnails
Click for full-size image (Screen Shot 2014-01-02 at 3.45.18 pm.png)
41.8 KB10 views
Attached Images
 
Reply With Quote
  #9  
Old 03-01-2014, 08:14 AM
gregbradley's Avatar
gregbradley
Registered User

gregbradley is offline
 
Join Date: Feb 2006
Location: Sydney
Posts: 15,106
Little black spots, green dots, red dots, blue dots often remain in filtered CCD imaging despite callibration.

The healing brush or clone tool in Photoshop works really well and is very simple to use. Just make sure the diameter of the brush is kept to a minimum and the distance the sample is taken of the background from the spot is not too far and does not have stars etc in it and is similar.

That's for Photoshop though.

Greg.
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 02:01 PM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Advertisement
NexDome Observatories
Advertisement
Meade Australia
Advertisement
SkyWatcher Australia
Advertisement
OzScopes Authorised Dealer
Advertisement
Bintel
Advertisement
Lunatico Astronomical
Advertisement
Celestron Australia
Advertisement
Astronomy and Electronics Centre
Advertisement