Quote:
Originally Posted by jayconnor
Hey everyone,
Ok we are about to get hit with a cold front in Victoria which will bring clouds and rain for 3 to 4 days they predict.
Im needing to clean my mirrors on my bt200 f/5. Now my question is pulling the primary mirror apart. Is there anything I need to do to pretty much not muck everything up? Is it as simple as pulling it apart and putting it back together? It really needs a good clean and im worried if I pull it apart ill bugger it all up.
Kind Regards, Jay
|
Try to remember the orientation in the mirror cell. Make a little mark on the side of the mirror and the cell to remember so you put it back in the same position. Also make sure you don't put the mirror clips back too tight. You might need to recollimate the scope.