#1  
Old 29-10-2015, 11:32 PM
elken2004 (Australia)
Registered User

elken2004 is offline
 
Join Date: Jan 2015
Location: boronia
Posts: 35
Elkens Lightbox LCD Panel

Ok I started out to make a traditional lightbox, but when I got to the part of light source, i was looking for diffusing material from lcd panels, then it struck why not use a panel as the light source. What was going to take a couple of hours blew out to 6hrs.

The pics explain all, well mostly.

first I made the box out of old signage plastic sheet.

Then I spent ages getting to panel to illuminate +12volts was easy but figuring out how to force then light on well, I tried several inverters till I found one that only required one of the pins to be switched to +12v

The panel was a bit long so it just sticks out of the top, masked with black card.

the diffuser is made with sticks of balsa wood, super glued and 'T' pinned together.

The diffuser sheets which were out a LCD panel, two of them were pinned either side of the balsa frame using hobby model railway spikes, (past hobby)

The conduit is a support when attached to scope, it is quite light, but extra support wont go astray.

I have done some testing with my 60d, results are looking good.

This was dimension-ed for my RC-8 but can be used on my other scopes too. Hole diameter is 250 mm.
Attached Thumbnails
Click for full-size image (IMG_5543 (Large).jpg)
119.1 KB22 views
Click for full-size image (IMG_5544 (Large).jpg)
112.5 KB25 views
Click for full-size image (IMG_5545 (Large).JPG)
149.2 KB24 views
Click for full-size image (IMG_5547 (Large).jpg)
101.8 KB21 views
Click for full-size image (IMG_5548 (Large).jpg)
146.9 KB18 views
Click for full-size image (IMG_5549 (Large).JPG)
146.4 KB20 views
Click for full-size image (IMG_5559 (Large).JPG)
158.6 KB20 views
Click for full-size image (IMG_5562 (Large).jpg)
97.9 KB22 views
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 11:50 AM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Advertisement
OzScopes Authorised Dealer
Advertisement
Lunatico Astronomical
Advertisement
Celestron Australia
Advertisement
Bintel
Advertisement
SkyWatcher Australia
Advertisement
NexDome Observatories
Advertisement
Meade Australia
Advertisement
Astronomy and Electronics Centre
Advertisement