Go Back   IceInSpace > Beginners Start Here > Beginners Equipment Discussions

Reply
 
Thread Tools Rate Thread
  #1  
Old 15-01-2019, 01:46 AM
darkage (Gareth)
Registered User

darkage is offline
 
Join Date: Jun 2018
Location: Melbourne
Posts: 2
Future AP interest - Next Step up from a Tasco 60mm

My Childhood refractor (Tasco 60mm) has a busted crude az alt mount.

Was thinking if it would be worth grabbing a 2nd hand well known brand 6" f5 reflector on a manual EQ3 mount if I can get one cheap enough as a interim solution, so I can go outside and start learning the sky for visually again. Im guessing it would be an upgrade from my refractor with a bonus EQ mount that I can use for both scopes which would probably save me from attempting to 3d print my own

My ultimate plan would be to get a EQ6 mount for AP (DSO interest), but still in forever research mode. I had always thought I would grab a 8" f4 or f5 gso newt, but a recent trip to my parents holiday house in the country changed my mind on a big 8". Later on I would need something more transportable for AP with family in tow which actually made me think more about smaller foot print RC astrographs or ED/APO refractors.

Currently 3d printing a barn door tracker for my DSLR to get a start simple in AP, which I will end up needing to buy a tripod anyways.

Does the above sound like a sensible plan.
Reply With Quote
  #2  
Old 15-01-2019, 02:41 AM
Ukastronomer's Avatar
Ukastronomer (Jeremy)
Registered User

Ukastronomer is offline
 
Join Date: Jan 2019
Location: Llandysul, WALES, UK
Posts: 780
Why is your "ultimate plan" to get an EQ mount. The EQ6 is a nice well proven mount.

I have been into Astronomy since I as 14, I am now 60, my personal friend was Patrick Moore and I spent many a week at farthings with his scopes and mine, in fact it was Patrick and I who did the reviews you see on OVL (and Skywatcher sales sites), so I am no beginner.

I say this because years back I made the mistake of thinking that EQ was the standard.

I hate EQ mounts, they look great in the shop but if you have to take them out and in again every time they are the worst thing to set up in the dark and cold and after an evening a pain to put away.

OK, of imaging long exposure they are needed but remember AltAz mounts can also be used for imaging.

Last year I retired at 60 and bought three scopes NO EQ, see images.

The one I use all the time takes NO setting up, a 120mm Refractor on AltAz mount, for imaging I use my Celestron Evolution AltAz, and for solar a 72mm ED on Gitzo tripod, I will be adding to this Ha scope next month an AltAz Skywatcher SolarQuest mount.

No one can say "buy this or that" only offer personal experience, seriously look at AltAz mounts such as

https://www.harrisontelescopes.co.uk...t.html#SID=568

Finally I would consider that most astro photography is done NOT with a reflecting scope, and as for cheaper new or used, the mount will be flimsy and balancing a DSLR on an already flimsy mount won't help

You can image on an AltAz

https://www.youtube.com/watch?v=uMXDHYCvnXw
Attached Thumbnails
Click for full-size image (P1050459.jpg)
112.9 KB14 views
Click for full-size image (h.jpg)
54.7 KB14 views
Click for full-size image (P1060045.jpg)
104.9 KB14 views

Last edited by Ukastronomer; 15-01-2019 at 02:59 AM.
Reply With Quote
  #3  
Old 15-01-2019, 10:59 PM
Wavytone (Nick)
BigBanger

Wavytone is offline
 
Join Date: Jul 2008
Location: Killara, Sydney
Posts: 3,756
Gareth you need to decide what you’re doing, and why, the right gear for the job will be self evident. Otherwise you’re likely to waste a lot of effort assembling several rigs and selling them before settling on one you like.

As one who built several scopes long ago, it’s admirable to see someone attempting a DIY barn-door tracker - but please understand that this is unlikely to be much more than a learning exercise and ultimately a waste of time and effort - you will appreciate why many skip that and buy a decent mount.
Reply With Quote
  #4  
Old 15-01-2019, 11:58 PM
Ukastronomer's Avatar
Ukastronomer (Jeremy)
Registered User

Ukastronomer is offline
 
Join Date: Jan 2019
Location: Llandysul, WALES, UK
Posts: 780
to start AP you only need a camera and a chair anyway
Attached Thumbnails
Click for full-size image (Image1.jpg)
140.8 KB17 views
Reply With Quote
  #5  
Old 22-01-2019, 10:50 AM
sil's Avatar
sil (Steve)
Not even a speck of dust

sil is offline
 
Join Date: Jun 2012
Location: Canberra
Posts: 1,279
starting in AP you can use your camera on a regular camera tripod. job done. Its how I do most of my work. no barn doors or tracking. Learn and understand what those things give you and you can work well to the limits of not having them or there hassles.

A manual cheap EQ is more likely to deter you from continuing than get you started. They are so flimsy and such a hassle to set up and use successfully for AP many chuck it in at that point. Tasco isnt exactly quality optics either, I'd suggest a 6 or 8" dosonian setup to get back into astronomy, they are cheap with great light gathering power and even possible for AP and later when you do get an EQ6 (good choice) you'll continue to use the dob for visual as its just so easy for looking around the sky and great to share an outing with friends.
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 06:28 AM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Advertisement
NexDome Observatories
Advertisement
Lunatico Astronomical
Advertisement
Celestron Australia
Advertisement
OzScopes Authorised Dealer
Advertisement
Bintel
Advertisement
SkyWatcher Australia
Advertisement
Meade Australia
Advertisement
Astronomy and Electronics Centre
Advertisement