Hi Rob, take a bit of care crimping these, they require constant pressure across the whole crimping surface. I personally already have a crimp tool for this but being careful it can be done using a stand large plier or multigrips.
If you use multigrip adjust them so that when pressing it is more crimping evenly.
For the most part they will crimp most of the time, but occasionally uneven crimping can create odd contacts not crimping or shorting across 2 pins.
i will take care to ensure the crimping is as precise as possible
with my thanks for the excellent feedback
cheers rob
Quote:
Originally Posted by mswhin63
Hi Rob, take a bit of care crimping these, they require constant pressure across the whole crimping surface. I personally already have a crimp tool for this but being careful it can be done using a stand large plier or multigrips.
If you use multigrip adjust them so that when pressing it is more crimping evenly.
For the most part they will crimp most of the time, but occasionally uneven crimping can create odd contacts not crimping or shorting across 2 pins.