#1  
Old 10-11-2018, 08:33 AM
graham.hobart's Avatar
graham.hobart (Graham stevens)
DeepSkySlacker

graham.hobart is offline
 
Join Date: Nov 2008
Location: hobart, tasmania
Posts: 2,214
ZWO ASI 1600pro advice

Hey brains trust, just got on the CMOS train and looking for experienced heads advice.
I want to know what people have found is a good exposure length and gain/ etc for this camera as I am moving from a KAF 8300 chip.
Using maxim DL and bortle 6 skies sometimes.
Also are people saving in mono 8 or 16 ?- that is the choice in sharpcap, is there a choice in maxim or is it default?
any other tips gratefully hoovered up!
thanks
Graham
Reply With Quote
  #2  
Old 10-11-2018, 09:47 AM
Atmos's Avatar
Atmos (Colin)
Ultimate Noob

Atmos is offline
 
Join Date: Aug 2011
Location: Melbourne
Posts: 6,980
Gain 76 will get you the full 12 bits and I found at F/5 180s worked RGB and 120s L.
At Gain 139 you hit unity which I’ve used 400s with 3nm narrowband.
Reply With Quote
  #3  
Old 10-11-2018, 09:58 AM
Marke's Avatar
Marke (Mark)
Registered User

Marke is offline
 
Join Date: Nov 2009
Location: Sydney
Posts: 1,193
Unity is a good balance just work with that to start with and similar to Colin I use 300s for NB and and around 60s for LRGB just depends on how dark your site is mine is in suburbia.
Reply With Quote
  #4  
Old 10-11-2018, 10:13 AM
Stonius's Avatar
Stonius (Markus)
Registered User

Stonius is offline
 
Join Date: Mar 2015
Location: Melbourne
Posts: 1,495
You definitely want to capture in 16 bit, not 8 bit.

The camera itself is 12bit, so you truncate 4 bits if you capture 8 bit.

The file it outputs is 16 bit with the 4 least significant bits padded with 0's.

The only reason to shoot 8 bit would be to increase frame rates for planetary.

At least, that's how I understand it. Others may correct me.

Markus
Reply With Quote
  #5  
Old 10-11-2018, 10:15 AM
Stonius's Avatar
Stonius (Markus)
Registered User

Stonius is offline
 
Join Date: Mar 2015
Location: Melbourne
Posts: 1,495
Also, as I discovered recently, don't route cameras through a hub - go direct to the computer or you will get choppy bandwidth as the other equipment is polled.

Markus
Reply With Quote
  #6  
Old 10-11-2018, 10:22 AM
Marke's Avatar
Marke (Mark)
Registered User

Marke is offline
 
Join Date: Nov 2009
Location: Sydney
Posts: 1,193
Quote:
Originally Posted by Stonius View Post
Also, as I discovered recently, don't route cameras through a hub - go direct to the computer or you will get choppy bandwidth as the other equipment is polled.

Markus
Ive been running thru a hub for 18mth never had an issue in fact I have about 5 other devises plugged into it with one cable to pc and never had an issue . I would be blaming your hub .
Reply With Quote
  #7  
Old 10-11-2018, 10:45 AM
Stonius's Avatar
Stonius (Markus)
Registered User

Stonius is offline
 
Join Date: Mar 2015
Location: Melbourne
Posts: 1,495
I have two MBeat hubs that are commonly used apparently. Both had the same issue. So if it's the hub, it's not hardware failure, but rather a design issue or a configuration issue, which is possible, I guess. But short of getting a 'google-PHD' in USB3 issues, plugging direct just worked for me, and with the onboard hub in the 1600-pro itself, it seems to have solved the issue.

USB can be finnicky and weird. Thats why people recommend always plugging into the same ports. I'm glad yours works for you. I'm just happy I now have a solution that enables me to continue. Maybe I'll get around to getting to the bottom of it again one day, but for now, I'm happy. :-)
Reply With Quote
  #8  
Old 10-11-2018, 11:00 AM
Marke's Avatar
Marke (Mark)
Registered User

Marke is offline
 
Join Date: Nov 2009
Location: Sydney
Posts: 1,193
Quote:
Originally Posted by Stonius View Post
I have two MBeat hubs that are commonly used apparently. Both had the same issue. So if it's the hub, it's not hardware failure, but rather a design issue or a configuration issue, which is possible, I guess. But short of getting a 'google-PHD' in USB3 issues, plugging direct just worked for me, and with the onboard hub in the 1600-pro itself, it seems to have solved the issue.

USB can be finnicky and weird. Thats why people recommend always plugging into the same ports. I'm glad yours works for you. I'm just happy I now have a solution that enables me to continue. Maybe I'll get around to getting to the bottom of it again one day, but for now, I'm happy. :-)
Well as long as you found a way to get it to work it must be in the hardware design I guess , mine was expensive but lucky has no issues and in dc powered
Reply With Quote
  #9  
Old 10-11-2018, 11:04 AM
codemonkey's Avatar
codemonkey (Lee)
Lee "Wormsy" Borsboom

codemonkey is offline
 
Join Date: Jul 2013
Location: Kilcoy, QLD
Posts: 2,058
I think you need 1 bit for every stop of dynamic range and it looks like even at the highest gain on the ASI 1600 you have 9 stops, so you'd be throwing away data to use 8 bits.

Optimal exposure length will vary wildly depending on your conditions (light pollution, moon phase) and various other factors (mount tracks / guides poorly? shorter is probably better). That said, I think Colin's recommendations would be a good starting point.
Reply With Quote
  #10  
Old 10-11-2018, 11:08 AM
Stonius's Avatar
Stonius (Markus)
Registered User

Stonius is offline
 
Join Date: Mar 2015
Location: Melbourne
Posts: 1,495
Quote:
Originally Posted by Marke View Post
Well as long as you found a way to get it to work it must be in the hardware design I guess , mine was expensive but lucky has no issues and in dc powered
Sorry, don't mean to hijack the thread - what hub are you using, if you don't mind me asking? :-)
Reply With Quote
  #11  
Old 10-11-2018, 11:19 AM
Marke's Avatar
Marke (Mark)
Registered User

Marke is offline
 
Join Date: Nov 2009
Location: Sydney
Posts: 1,193
Quote:
Originally Posted by Stonius View Post
Sorry, don't mean to hijack the thread - what hub are you using, if you don't mind me asking? :-)
No worries
https://www.startech.com/Cards-Adapt...s/~ST7300USBME
DC 7 to 48v and individually isolated
Reply With Quote
  #12  
Old 16-11-2018, 10:13 AM
Camelopardalis's Avatar
Camelopardalis (Dunk)
Drifting from the pole

Camelopardalis is offline
 
Join Date: Feb 2013
Location: Brisbane
Posts: 5,425
Just ensure you take sky limited subs and lots of them

Also, don't be put off by how a single sub looks...they pop with integration!
Reply With Quote
  #13  
Old 16-11-2018, 11:02 AM
RickS's Avatar
RickS (Rick)
PI cult recruiter

RickS is offline
 
Join Date: Apr 2010
Location: Brisbane
Posts: 10,584
I have been testing with gain 200 and getting good results with 30 second subs even in narrowband, but I'm working at f/3.6 or faster and taking a *lot* of subs. I haven't done the sums yet to figure out if I'm sky limited but the core of M42 is burned out in a 30 second Ha sub...

Cheers,
Rick.
Reply With Quote
  #14  
Old 17-11-2018, 06:20 PM
Camelopardalis's Avatar
Camelopardalis (Dunk)
Drifting from the pole

Camelopardalis is offline
 
Join Date: Feb 2013
Location: Brisbane
Posts: 5,425
Quote:
Originally Posted by RickS View Post
I have been testing with gain 200 and getting good results with 30 second subs even in narrowband, but I'm working at f/3.6 or faster and taking a *lot* of subs. I haven't done the sums yet to figure out if I'm sky limited but the core of M42 is burned out in a 30 second Ha sub...
My guess is it got burned out a lot sooner than 30 seconds
Reply With Quote
  #15  
Old 18-11-2018, 02:02 PM
RickS's Avatar
RickS (Rick)
PI cult recruiter

RickS is offline
 
Join Date: Apr 2010
Location: Brisbane
Posts: 10,584
Quote:
Originally Posted by Camelopardalis View Post
My guess is it got burned out a lot sooner than 30 seconds
The 2 seconds subs hit a max of about 18000 ADU in the core so anything over 7 or 8 seconds would be blown out, Dunk
Reply With Quote
  #16  
Old 18-11-2018, 09:18 PM
Camelopardalis's Avatar
Camelopardalis (Dunk)
Drifting from the pole

Camelopardalis is offline
 
Join Date: Feb 2013
Location: Brisbane
Posts: 5,425
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 03:10 AM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Advertisement
Testar
Advertisement
Bintel
Advertisement