Pier manufactured to support losmandy titan50 with side supports
As I said I am in the market for a permanent pier
Pier height: 1080 mm
Pier to be constructed with 170 mm diameter main tube or larger with four vertical fully welded gussets to within 150 of top plate
Pier will have a Losmandy adaptor top plate.
Initial pier height will be 1080 mm with the
Pier base plate will have four slotted holes to assist with fine tuning alignment.
Pier base plate will be 12 mm thick minimum.
So if you can help me out let me know please
Last edited by h0ughy; 30-11-2020 at 08:21 PM.
|