Quote:
Originally Posted by Startrek
If your hand controller operates your mount ok then you connect to EQMOD and it wont work, then the most common faults are as follows -
Cable or connector faults ( EQ direct or via serial adapter)
USB serial adapter fault ( prolific adapters are notorious for faults )EQ direct is the best way to connect to mount
Incorrect com port in device manager ( EQMOD com port must match com port in Device manger ) check EQMOD toolbox
Planetarium location and time details must match EQMOD location and time details
Check settings in EQMOD
|
Hi Martin,
Thanks for your help and you were spot on! It was that darn USB Serial cable. Mick at Bintel said sudden fails like this are often cables. So back in action.
Again thank you fr the detailed response, I really appreciate it.
Kind regards
Geoff