|
Tube Rings to suit 200mm reflector (id 235mm)
Hi All,
I am after a tube ring, or set of tube rings to suit my Skywatcher 8" CF OTA.
I would like to use this as a counter weight down near the primary mirror end to balance out the scope a little bit easier when the SBIG is attached.
I can't move the tube any further down the rings as the camera will start to hit the mount, so my only other option is to add weight to the rear of the OTA.
If any one has a spare they would like to part with, please let me know.
Many thanks,
Andrew..
|
