ICEINSPACE
Most Read Articles
Moon Phase
CURRENT MOON Waxing Crescent
26.2%
The Sun Now
Time Zones
Sydney
1:53 am
Perth
11:53 pm
Auckland
3:53 am
New York*
11:53 am
Paris*
5:53 pm
GMT
3:53 pm




Go Back   IceInSpace > Equipment > ATM and DIY Projects

Reply
 
Thread Tools Rate Thread
  #1  
Old 01-04-2017, 08:59 PM
Boozlefoot
Registered User

Boozlefoot is offline
 
Join Date: Nov 2016
Location: Western NSW
Posts: 113
GEM modification/refurbish

At the urging of other members, I will diary the refurbishing of a 1960's GEM which I came by recently. It will be housed in an observatory and carry a 12" GSO (Ex Dob), but will retain the dob mounting plates (less bearing/tensioners) on the OTA so the unit can easily be dismounted and used as a Dob at another dark site. We roughly mounted the OTA today to check slew dimensions so observatory floor plans can commence. Several things came to mind, in particular, EP height. Observatory costs can be high, so if we reduce height, we reduce cost! Also, I don't want to be up large ladders when I turn 80! We intend firstly to replace the large saddle assembly and adaptor plate, which is better suited to a BBQ. A smaller adaptor plate and GSO alloy scope rings will be employed, reducing height by 3". Pier to be shortened by 10", (C/W still has clearance) and unsure yet to retain 3 large mounting feet, this would give us a height reduction of app 17" total. Any advice more than welcome!
Attached Thumbnails
Click for full-size image (IMGP0004.JPG)
92.3 KB85 views
Click for full-size image (IMGP0006.JPG)
97.0 KB91 views
Reply With Quote
  #2  
Old 09-04-2017, 04:35 PM
Boozlefoot
Registered User

Boozlefoot is offline
 
Join Date: Nov 2016
Location: Western NSW
Posts: 113
Great! Just finished the paintwork tart up, balanced it this morning, and clouds everywhere this arvo. My apologies,,,,,,my fault.
Attached Thumbnails
Click for full-size image (IMGP0016.JPG)
92.9 KB58 views
Click for full-size image (IMGP0018.JPG)
144.3 KB62 views
Click for full-size image (IMGP0023.JPG)
94.0 KB73 views
Reply With Quote
  #3  
Old 09-04-2017, 04:54 PM
torana68's Avatar
torana68 (Roger)
Registered User

torana68 is offline
 
Join Date: Jul 2008
Location: ACT/NSW
Posts: 709
Nice
Reply With Quote
  #4  
Old 14-04-2017, 08:49 AM
torana68's Avatar
torana68 (Roger)
Registered User

torana68 is offline
 
Join Date: Jul 2008
Location: ACT/NSW
Posts: 709
any history on the mount?
Reply With Quote
  #5  
Old 17-04-2017, 08:00 AM
Boozlefoot
Registered User

Boozlefoot is offline
 
Join Date: Nov 2016
Location: Western NSW
Posts: 113
Roger, As far as I know, the previous owner of the mount (for the past 40 years) got it from an engineer who constructed it in Arncliffe, NSW. The encoder on it was by a company which was bought out by Astronautical Instruments USA in 1964? So probably just a year or two prior to that.
Reply With Quote
  #6  
Old 17-04-2017, 08:56 AM
torana68's Avatar
torana68 (Roger)
Registered User

torana68 is offline
 
Join Date: Jul 2008
Location: ACT/NSW
Posts: 709
looks like a nice piece of ATM work , can you put up a closer photo of the mount head?
Reply With Quote
  #7  
Old 15-06-2017, 05:16 PM
Boozlefoot
Registered User

Boozlefoot is offline
 
Join Date: Nov 2016
Location: Western NSW
Posts: 113
Stepper motors, power supply and controller all wired and tested. (Bags of torque!) Motor mounts arrived, lathe organised for pulleys next week. awaiting PWM's for fine tuning, then a mock-up for final mounting. The beast almost lives!
Reply With Quote
  #8  
Old 19-06-2017, 08:06 PM
Boozlefoot
Registered User

Boozlefoot is offline
 
Join Date: Nov 2016
Location: Western NSW
Posts: 113
Blew the backside out of the stepper controller, (actually set it on fire in the office!), so spent the weekend making/fitting manual brakes to both axis shafts for push-to use. Am trying to adapt clutch from old worm drive to fit to RA belt drive system. Waiting another month for replacement controller, if still experiencing problems, will build controller to suit EQASCOM from scratch and include a trial cooling system. ATM and DIY astronomy is definitely for the patient and persistent. Astronomy gear is now taking over my domicile, luckily no SWIMBO's to question the relevance of 24v power supplies on the kitchen table and parts waiting for paint to dry in the loungeroom in front of the fire.
Reply With Quote
  #9  
Old 22-06-2017, 08:22 PM
torana68's Avatar
torana68 (Roger)
Registered User

torana68 is offline
 
Join Date: Jul 2008
Location: ACT/NSW
Posts: 709
life can be annoying.....keep at it
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 01:53 AM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Advertisement
Meade Instruments
Advertisement
SkyWatcher Star Discovery
Advertisement
FLI Cameras and Imaging Accessories
Advertisement
Tasco Australia
Advertisement
Bintel
Advertisement
Lunatico Astronomical
Advertisement
Atik One
Advertisement
OzScopes Authorised Dealer
Advertisement
Astronomy and Electronics Centre
Advertisement