The piers (2) are professionally made, not by me, laser cut and powder coated in black. The pier was designed for my own use with a price limit of $800 which was not possible for a one off. The Losmandy Mount Adapter and G11 as shown are not included.
The pipe is 219 mm diameter with a 4.8 wall and 950 mm high.
The three plates are 320x10 msp with 4 M16 bolt holes. The fins are 650 x 50-25 x 6 mm msp
The adapter plate can either be bolted straight onto the top plate, or use a 4xM16 ratbox arrangement for extra height etc.
The top plate has a 120 mm center cutout to allow for filling and mount adapters that need to be fixed from underneath so they can be fixed without a ratbox. The bolt holes are radius curves to allow for a small amount of azimuth rotation (+- 3.5 degs) just in case.
Weight 45KG
Price including GST A$ 740.00 no offers except higher.
Prefer pickup or Sydney area drop off, but if you want to arrange delivery I can drop off at a local Pack & Send depot, that saves quite a bit.
