#2281  
Old 16-10-2019, 10:21 PM
AnakChan (Sean)
Registered User

AnakChan is offline
 
Join Date: Sep 2014
Location: Perth
Posts: 106
Heres's my (trans)portable setup. The FSQ-85ED with an SS-One Traveler harmonic drive-based mount. The SS-One is made by a chap called Nakazawa-san and he makes many small unique stuff.

The Raspberry Pi based AutoGuider Pro controller (which he makes not only for his Traveler mount, but also for other makers), is a pretty nifty device. Not only does it perform autoguiding, it controls focusing, DSLR intervalometer control, dithering, GOTO, and Polar Alignment. With it's USB ports, it accepts WiFi and GPS devices. The WiFi USB, there's remote VNC display, and Sky Safari Pro control for a more extensive GOTO.

So there's really no more need for a PC/Laptop with this setup. It does need 12V which I use the OmniCharge Ultimate to power the mount.

A little video snippet of the Autoguiding calibration in action :-

https://youtu.be/v6-zXrae7eI
Attached Thumbnails
Click for full-size image (DSC_3504 (1).jpeg)
181.9 KB61 views
Reply With Quote
  #2282  
Old 17-10-2019, 12:03 PM
Spock (Michael)
Registered User

Spock is offline
 
Join Date: May 2019
Location: Whitlands
Posts: 4
I've built a 'mobile observatory' for Celestron Edge11" on an EQ8 mount, because of my forested property. I'm learning SynScan WiFi, Stellarium & PHD2 guiding etc. As a Vulcan, all the other human setups are very foreign to me and I'm still to image successfully. Is anybody out there...out there...out there...
Reply With Quote
  #2283  
Old 19-10-2019, 03:54 PM
Wilso (Darren)
Registered User

Wilso is offline
 
Join Date: Nov 2016
Location: Gawler
Posts: 304
New focuser

Hi all,

Finally managed to mount my new to me focuser on the intes mk-65.
Not too many focusers will fit this scope due to its very short light path to reach focus, the only ones that I could find were made by JMI and Starlight instruments.
Only by matching this with the T2 Baader prism diagonal made this possible with a min total 120mm light path to focus my shortest eyepiece.
Hopefully will be a great improvement over the stock helical eyepiece/diagonal.
The last photo shows the original diagonal/focuser
Attached Thumbnails
Click for full-size image (44D45E0A-E4BE-4C2B-B811-02D63C84F983.jpg)
184.4 KB42 views
Click for full-size image (59C2CBDA-11B6-4FB3-899C-AC2D70BBDC4F.jpg)
183.4 KB26 views
Click for full-size image (712037A3-F966-4DF6-940E-02ABC5BB689F.jpg)
187.7 KB29 views
Reply With Quote
  #2284  
Old 20-10-2019, 06:17 PM
FlashDrive's Avatar
FlashDrive (Col)
Senior Citizen

FlashDrive is offline
 
Join Date: Apr 2008
Location: Brisbane North
Posts: 4,145
Quote:
Originally Posted by Wilso View Post
Hi all,

Finally managed to mount my new to me focuser on the intes mk-65.
That's much better than the original....really like it.

Col...
Reply With Quote
  #2285  
Old 21-10-2019, 11:09 AM
Rainmaker (Matt)
Excalibur Industries.....

Rainmaker is offline
 
Join Date: Jun 2019
Location: Canberra
Posts: 73
I managed to pry this beautiful TMB-LZOS 152F8 from Chris's grip a few days ago, have to make a handle for it today then "First Light" time.....

Those familiar with the Lego SaturnV will understand how big the scope is:
(and visa versa )
Attached Thumbnails
Click for full-size image (MIS_7648.jpg)
171.6 KB33 views
Reply With Quote
  #2286  
Old 21-10-2019, 11:33 AM
sharpiel (Les)
The Birdman

sharpiel is offline
 
Join Date: Jun 2010
Posts: 572
Quote:
Originally Posted by Wilso View Post
Hi all,

Finally managed to mount my new to me focuser on the intes mk-65.
Not too many focusers will fit this scope due to its very short light path to reach focus, the only ones that I could find were made by JMI and Starlight instruments.
Only by matching this with the T2 Baader prism diagonal made this possible with a min total 120mm light path to focus my shortest eyepiece.
Hopefully will be a great improvement over the stock helical eyepiece/diagonal.
The last photo shows the original diagonal/focuser
Love that mount so much!
Reply With Quote
  #2287  
Old 21-10-2019, 11:34 AM
sharpiel (Les)
The Birdman

sharpiel is offline
 
Join Date: Jun 2010
Posts: 572
Quote:
Originally Posted by Rainmaker View Post
I managed to pry this beautiful TMB-LZOS 152F8 from Chris's grip a few days ago, have to make a handle for it today then "First Light" time.....

Those familiar with the Lego SaturnV will understand how big the scope is:
(and visa versa )
Lovely scope. Wouldn't mind it myself.
Reply With Quote
  #2288  
Old 21-10-2019, 11:45 AM
croweater (Richard)
Registered User

croweater is offline
 
Join Date: Feb 2015
Location: Millicent, South Australia
Posts: 231
Quote:
Originally Posted by Rainmaker View Post
I managed to pry this beautiful TMB-LZOS 152F8 from Chris's grip a few days ago, have to make a handle for it today then "First Light" time.....

Those familiar with the Lego SaturnV will understand how big the scope is:
(and visa versa )
Gee that is nice Matt! What do you buy your wife as appeasement?
Cheers, Richard
Reply With Quote
  #2289  
Old 21-10-2019, 02:15 PM
ab1963 (Andrew)
Refractors-Thatís It

ab1963 is offline
 
Join Date: Jan 2015
Location: sydney
Posts: 334
Quote:
Originally Posted by Rainmaker View Post
I managed to pry this beautiful TMB-LZOS 152F8 from Chris's grip a few days ago, have to make a handle for it today then "First Light" time.....

Those familiar with the Lego SaturnV will understand how big the scope is:
(and visa versa )

Nice scope Matt and beautifully finished but where's the pictures of the objective.......
Reply With Quote
  #2290  
Old 22-10-2019, 09:52 AM
Rainmaker (Matt)
Excalibur Industries.....

Rainmaker is offline
 
Join Date: Jun 2019
Location: Canberra
Posts: 73
Quote:
Originally Posted by ab1963 View Post
Nice scope Matt and beautifully finished but where's the pictures of the objective.......
Here you go Andrew ....

You know me, I just have to tear things apart to see how they work....

Hard to believe that there is more $10K of Russian glass sitting there.... these TMB-LZOS cells are built from the hubs of Russian tanks.....
however after many years use near the coast in Queensland enough of the salt air had found its way inside to leave a deposit on the front of G1 and rear of G3 elements and my OCD just couldn't leave it there.

The glass is once again pristine. There were a dozen spots that no cleaning liquid would dissolve so using Roland Christen's method (a little saliva on the fingertip) even they are now history.

I hope Chris doesn't see the picture or he might want the scope back....
Attached Thumbnails
Click for full-size image (MIS_7652.jpg)
135.2 KB31 views
Reply With Quote
  #2291  
Old 22-10-2019, 10:04 AM
CeratodusDuck (George)
Registered User

CeratodusDuck is offline
 
Join Date: Feb 2019
Location: Within the greater Milky Way
Posts: 16
Yes sir, definitely some bragging rights there Rainmaker!
Reply With Quote
  #2292  
Old 22-10-2019, 10:23 AM
ab1963 (Andrew)
Refractors-Thatís It

ab1963 is offline
 
Join Date: Jan 2015
Location: sydney
Posts: 334
Quote:
Originally Posted by Rainmaker View Post
Here you go Andrew ....

You know me, I just have to tear things apart to see how they work....

Hard to believe that there is more $10K of Russian glass sitting there.... these TMB-LZOS cells are built from the hubs of Russian tanks.....
however after many years use near the coast in Queensland enough of the salt air had found its way inside to leave a deposit on the front of G1 and rear of G3 elements and my OCD just couldn't leave it there.

The glass is once again pristine. There were a dozen spots that no cleaning liquid would dissolve so using Roland Christen's method (a little saliva on the fingertip) even they are now history.

I hope Chris doesn't see the picture or he might want the scope back....
Thanks for that Matt a thing beauty and hanging for first light
Reply With Quote
  #2293  
Old 26-10-2019, 02:40 PM
Wilso (Darren)
Registered User

Wilso is offline
 
Join Date: Nov 2016
Location: Gawler
Posts: 304
Quote:
Originally Posted by sharpiel View Post
Love that mount so much!
Thanks Les I do too,
Itís a very versatile mount, Iíve only used it in equatorial mode twice since Iíve had it, so it stays as is in planet fork mode all the time because I like it that much.
I have the adapters also for alt/az which I havenít even tried yet!
One day...
Reply With Quote
  #2294  
Old 03-11-2019, 03:41 PM
Rainmaker (Matt)
Excalibur Industries.....

Rainmaker is offline
 
Join Date: Jun 2019
Location: Canberra
Posts: 73
Shortened the ScopeGuard case by 300mm since I won't be hanging imaging equipment from the Feathertouch....
Attached Thumbnails
Click for full-size image (MIS_7667 (1).jpg)
148.2 KB29 views
Reply With Quote
  #2295  
Old 03-11-2019, 04:20 PM
FlashDrive's Avatar
FlashDrive (Col)
Senior Citizen

FlashDrive is offline
 
Join Date: Apr 2008
Location: Brisbane North
Posts: 4,145
Always Nice Gear Matt ....
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 09:45 AM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Advertisement
Celestron Australia
Advertisement
Bintel
Advertisement
NexDome Observatories
Advertisement
SkyWatcher Australia
Advertisement
Meade Australia
Advertisement
Lunatico Astronomical
Advertisement
OzScopes Authorised Dealer
Advertisement
Astronomy and Electronics Centre
Advertisement