Go Back   IceInSpace > Equipment > Equipment Discussions

Reply
 
Thread Tools Rate Thread
  #1  
Old 28-11-2018, 09:37 AM
I.C.D (Ian)
Registered User

I.C.D is offline
 
Join Date: May 2006
Location: Wattle Ponds via Singleton
Posts: 600
Earthing the Observatory

Hi All ,
Should you earth your observatory .My observatory is 12 volt battery /solar panels and one 12v/240v inverter to run a USB hub and light box and anything else that may requires 240 volts

Ian
Reply With Quote
  #2  
Old 28-11-2018, 09:53 AM
Wavytone
Registered User

Wavytone is offline
 
Join Date: Jul 2008
Location: Killara, Sydney
Posts: 4,147
Wouldn't hurt to call an electrician, frankly, if you have 240VAC in the obs. A couple of hundred $ well spent, I suggest.
Reply With Quote
  #3  
Old 28-11-2018, 10:13 AM
glend (Glen)
Registered User

glend is offline
 
Join Date: Jun 2013
Location: Lake Macquarie
Posts: 7,045
I ran an earth for my pier/mount, it's pretty easy to do. You can get by with a piece of reo bar driven into the ground, and a wire attached to it with a hose clamp, you can get it all from Bunnings for $10.

Btw, most sizable inverters do have a chassis earth point. My permanently mounted inverter in my big shed is earthed.
Reply With Quote
  #4  
Old 29-11-2018, 04:45 PM
I.C.D (Ian)
Registered User

I.C.D is offline
 
Join Date: May 2006
Location: Wattle Ponds via Singleton
Posts: 600
Hi Glen,
When into my shed found some earth wire a cooper pipe some clamps ,I have earth the pier and put hand earth pad as well for any static electricity build up I mite have .
Ian
Reply With Quote
  #5  
Old 29-11-2018, 09:34 PM
Lee's Avatar
Lee
Colour is over-rated

Lee is offline
 
Join Date: Sep 2005
Location: Newcastle, Australia
Posts: 2,414
I have a grounded sheet of aluminium checker plate in the obs now, I did this as static build up was causing problems with imaging electronics...
Reply With Quote
  #6  
Old 30-11-2018, 01:26 PM
rogerg's Avatar
rogerg (Roger)
Registered User

rogerg is offline
 
Join Date: Feb 2006
Location: Perth, Western Australia
Posts: 4,563
Yes you should earth it. If nothing else to help prevent damage from lightning strikes and associated static charge buildup if you're in a risk area.

My concrete has copper+aluminium 25mm diameter lightning rods in it (bonded to the reinforcing), exposed with terminals on the outside. Those terminals are then earthed to copper in the ground. Then the steel structure is earthed also (less of an issue as it's embedded in the concrete).

Roger.
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 05:02 AM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Advertisement
Testar
Advertisement
Bintel
Advertisement