#2281  
Old 16-10-2019, 10:21 PM
AnakChan (Sean)
Registered User

AnakChan is offline
 
Join Date: Sep 2014
Location: Perth
Posts: 371
Heres's my (trans)portable setup. The FSQ-85ED with an SS-One Traveler harmonic drive-based mount. The SS-One is made by a chap called Nakazawa-san and he makes many small unique stuff.

The Raspberry Pi based AutoGuider Pro controller (which he makes not only for his Traveler mount, but also for other makers), is a pretty nifty device. Not only does it perform autoguiding, it controls focusing, DSLR intervalometer control, dithering, GOTO, and Polar Alignment. With it's USB ports, it accepts WiFi and GPS devices. The WiFi USB, there's remote VNC display, and Sky Safari Pro control for a more extensive GOTO.

So there's really no more need for a PC/Laptop with this setup. It does need 12V which I use the OmniCharge Ultimate to power the mount.

A little video snippet of the Autoguiding calibration in action :-

https://youtu.be/v6-zXrae7eI
Attached Thumbnails
Click for full-size image (DSC_3504 (1).jpeg)
181.9 KB132 views
Reply With Quote
  #2282  
Old 17-10-2019, 12:03 PM
Spock (Michael)
Registered User

Spock is offline
 
Join Date: May 2019
Location: Whitlands
Posts: 4
I've built a 'mobile observatory' for Celestron Edge11" on an EQ8 mount, because of my forested property. I'm learning SynScan WiFi, Stellarium & PHD2 guiding etc. As a Vulcan, all the other human setups are very foreign to me and I'm still to image successfully. Is anybody out there...out there...out there...
Reply With Quote
  #2283  
Old 19-10-2019, 03:54 PM
Wilso
Registered User

Wilso is offline
 
Join Date: Nov 2016
Location: Adelaide
Posts: 414
New focuser

Hi all,

Finally managed to mount my new to me focuser on the intes mk-65.
Not too many focusers will fit this scope due to its very short light path to reach focus, the only ones that I could find were made by JMI and Starlight instruments.
Only by matching this with the T2 Baader prism diagonal made this possible with a min total 120mm light path to focus my shortest eyepiece.
Hopefully will be a great improvement over the stock helical eyepiece/diagonal.
The last photo shows the original diagonal/focuser
Attached Thumbnails
Click for full-size image (44D45E0A-E4BE-4C2B-B811-02D63C84F983.jpg)
184.4 KB94 views
Click for full-size image (59C2CBDA-11B6-4FB3-899C-AC2D70BBDC4F.jpg)
183.4 KB62 views
Click for full-size image (712037A3-F966-4DF6-940E-02ABC5BB689F.jpg)
187.7 KB73 views
Reply With Quote
  #2284  
Old 20-10-2019, 06:17 PM
FlashDrive's Avatar
FlashDrive (Poppy)
Senior Citizen

FlashDrive is offline
 
Join Date: Apr 2008
Location: Bribie Island
Posts: 5,056
Quote:
Originally Posted by Wilso View Post
Hi all,

Finally managed to mount my new to me focuser on the intes mk-65.
That's much better than the original....really like it.

Col...
Reply With Quote
  #2285  
Old 21-10-2019, 11:09 AM
Rainmaker's Avatar
Rainmaker (Matt)
Strictly Visual......

Rainmaker is offline
 
Join Date: Jun 2019
Location: Canberra
Posts: 581
I managed to pry this beautiful TMB-LZOS 152F8 from Chris's grip a few days ago, have to make a handle for it today then "First Light" time.....

Those familiar with the Lego SaturnV will understand how big the scope is:
(and visa versa )
Attached Thumbnails
Click for full-size image (MIS_7648.jpg)
171.6 KB78 views
Reply With Quote
  #2286  
Old 21-10-2019, 11:33 AM
sharpiel
Registered User

sharpiel is offline
 
Join Date: Jun 2010
Posts: 715
Quote:
Originally Posted by Wilso View Post
Hi all,

Finally managed to mount my new to me focuser on the intes mk-65.
Not too many focusers will fit this scope due to its very short light path to reach focus, the only ones that I could find were made by JMI and Starlight instruments.
Only by matching this with the T2 Baader prism diagonal made this possible with a min total 120mm light path to focus my shortest eyepiece.
Hopefully will be a great improvement over the stock helical eyepiece/diagonal.
The last photo shows the original diagonal/focuser
Love that mount so much!
Reply With Quote
  #2287  
Old 21-10-2019, 11:34 AM
sharpiel
Registered User

sharpiel is offline
 
Join Date: Jun 2010
Posts: 715
Quote:
Originally Posted by Rainmaker View Post
I managed to pry this beautiful TMB-LZOS 152F8 from Chris's grip a few days ago, have to make a handle for it today then "First Light" time.....

Those familiar with the Lego SaturnV will understand how big the scope is:
(and visa versa )
Lovely scope. Wouldn't mind it myself.
Reply With Quote
  #2288  
Old 21-10-2019, 11:45 AM
croweater (Richard)
Don't Panic!

croweater is offline
 
Join Date: Feb 2015
Location: Mount Gambier, South Australia
Posts: 529
Quote:
Originally Posted by Rainmaker View Post
I managed to pry this beautiful TMB-LZOS 152F8 from Chris's grip a few days ago, have to make a handle for it today then "First Light" time.....

Those familiar with the Lego SaturnV will understand how big the scope is:
(and visa versa )
Gee that is nice Matt! What do you buy your wife as appeasement?
Cheers, Richard
Reply With Quote
  #2289  
Old 21-10-2019, 02:15 PM
ab1963 (Andrew)
Refractors-That’s It

ab1963 is offline
 
Join Date: Jan 2015
Location: Rangeville, Toowoomba
Posts: 440
Quote:
Originally Posted by Rainmaker View Post
I managed to pry this beautiful TMB-LZOS 152F8 from Chris's grip a few days ago, have to make a handle for it today then "First Light" time.....

Those familiar with the Lego SaturnV will understand how big the scope is:
(and visa versa )

Nice scope Matt and beautifully finished but where's the pictures of the objective.......
Reply With Quote
  #2290  
Old 22-10-2019, 09:52 AM
Rainmaker's Avatar
Rainmaker (Matt)
Strictly Visual......

Rainmaker is offline
 
Join Date: Jun 2019
Location: Canberra
Posts: 581
Quote:
Originally Posted by ab1963 View Post
Nice scope Matt and beautifully finished but where's the pictures of the objective.......
Here you go Andrew ....

You know me, I just have to tear things apart to see how they work....

Hard to believe that there is more $10K of Russian glass sitting there.... these TMB-LZOS cells are built from the hubs of Russian tanks.....
however after many years use near the coast in Queensland enough of the salt air had found its way inside to leave a deposit on the front of G1 and rear of G3 elements and my OCD just couldn't leave it there.

The glass is once again pristine. There were a dozen spots that no cleaning liquid would dissolve so using Roland Christen's method (a little saliva on the fingertip) even they are now history.

I hope Chris doesn't see the picture or he might want the scope back....
Attached Thumbnails
Click for full-size image (MIS_7652.jpg)
135.2 KB72 views
Reply With Quote
  #2291  
Old 22-10-2019, 10:04 AM
CeratodusDuck (George)
Registered User

CeratodusDuck is offline
 
Join Date: Feb 2019
Location: Within the greater Milky Way
Posts: 69
Yes sir, definitely some bragging rights there Rainmaker!
Reply With Quote
  #2292  
Old 22-10-2019, 10:23 AM
ab1963 (Andrew)
Refractors-That’s It

ab1963 is offline
 
Join Date: Jan 2015
Location: Rangeville, Toowoomba
Posts: 440
Quote:
Originally Posted by Rainmaker View Post
Here you go Andrew ....

You know me, I just have to tear things apart to see how they work....

Hard to believe that there is more $10K of Russian glass sitting there.... these TMB-LZOS cells are built from the hubs of Russian tanks.....
however after many years use near the coast in Queensland enough of the salt air had found its way inside to leave a deposit on the front of G1 and rear of G3 elements and my OCD just couldn't leave it there.

The glass is once again pristine. There were a dozen spots that no cleaning liquid would dissolve so using Roland Christen's method (a little saliva on the fingertip) even they are now history.

I hope Chris doesn't see the picture or he might want the scope back....
Thanks for that Matt a thing beauty and hanging for first light
Reply With Quote
  #2293  
Old 26-10-2019, 02:40 PM
Wilso
Registered User

Wilso is offline
 
Join Date: Nov 2016
Location: Adelaide
Posts: 414
Quote:
Originally Posted by sharpiel View Post
Love that mount so much!
Thanks Les I do too,
It’s a very versatile mount, I’ve only used it in equatorial mode twice since I’ve had it, so it stays as is in planet fork mode all the time because I like it that much.
I have the adapters also for alt/az which I haven’t even tried yet!
One day...
Reply With Quote
  #2294  
Old 03-11-2019, 03:41 PM
Rainmaker's Avatar
Rainmaker (Matt)
Strictly Visual......

Rainmaker is offline
 
Join Date: Jun 2019
Location: Canberra
Posts: 581
Shortened the ScopeGuard case by 300mm since I won't be hanging imaging equipment from the Feathertouch....
Attached Thumbnails
Click for full-size image (MIS_7667 (1).jpg)
148.2 KB75 views
Reply With Quote
  #2295  
Old 03-11-2019, 04:20 PM
FlashDrive's Avatar
FlashDrive (Poppy)
Senior Citizen

FlashDrive is offline
 
Join Date: Apr 2008
Location: Bribie Island
Posts: 5,056
Always Nice Gear Matt ....
Reply With Quote
  #2296  
Old 16-11-2019, 03:22 PM
Wavytone
Registered User

Wavytone is offline
 
Join Date: Jul 2008
Location: Killara, Sydney
Posts: 4,147
Flash, get a towel...forget those little refractors, here's THE BEAST !

A quiet afternoon so I spent some time getting ready for next weekend.

- OTA on the mount... inside that Matthias Wirth lid lies a work of art.
- I've moved the finder well forward on dovetail - this turns out to be way, way more convenient than having the finder on the rear end of the scope.
- The business end with a 30mm erfle of some sort,
- Loaded with a turret with a set of Fujiyama orthos and a finder eyepiece.

Interestingly the van Slyke turret requires less backfocus than the APM star diagonal with rotolock does.
Attached Thumbnails
Click for full-size image (IMG_4460.jpg)
90.9 KB104 views
Click for full-size image (IMG_4463.jpg)
70.4 KB127 views
Click for full-size image (IMG_4454.jpg)
96.2 KB113 views
Click for full-size image (IMG_4450.jpg)
64.6 KB101 views
Click for full-size image (IMG_4465.jpg)
55.0 KB101 views

Last edited by Wavytone; 16-11-2019 at 03:35 PM.
Reply With Quote
  #2297  
Old 16-11-2019, 04:01 PM
Slawomir's Avatar
Slawomir (Suavi)
Registered User

Slawomir is offline
 
Join Date: Sep 2014
Location: North Queensland
Posts: 3,240
Wow.. nice scope, if the optic really are that good !

but... get yourself a sharpie pen and blacken the interior - the scattered light from the inside of the tube is atrocious.
Reply With Quote
  #2298  
Old 16-11-2019, 04:05 PM
Wavytone
Registered User

Wavytone is offline
 
Join Date: Jul 2008
Location: Killara, Sydney
Posts: 4,147
Ah it’s not as bad as it looks - that was right under a twin 40W fluoro light.

And I do have a bottle of Black 3.0 for the day I’m brave enough to open the OTA as I am thinking of some mechanical mods.

In practice the contrast on the moon/Jupiter is superb, like a refractor.
Reply With Quote
  #2299  
Old 16-11-2019, 04:38 PM
Slawomir's Avatar
Slawomir (Suavi)
Registered User

Slawomir is offline
 
Join Date: Sep 2014
Location: North Queensland
Posts: 3,240
I'm sure it's a fantastic scope Wavy. Just when I saw the reflections I could not resist paraphrasing your very comment from a while ago - I thought it will be funny.
Reply With Quote
  #2300  
Old 16-11-2019, 04:54 PM
Wavytone
Registered User

Wavytone is offline
 
Join Date: Jul 2008
Location: Killara, Sydney
Posts: 4,147
Hmm. Very poor lighting indeed .. in the second the primary looks like it’s cracked LOL... but it’s just a reflection of something behind me.
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 03:42 AM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Advertisement
Testar
Advertisement
Bintel
Advertisement